Samsung Galaxy A20 A205YNDVS7CVC1
SM-A205YN 1 country Android 11

Samsung Galaxy A20 A205YNDVS7CVC1 Firmware

Samsung Galaxy A20 A205YNDVS7CVC1 is an Android 11 firmware for Australia (TLP, VAP, XSA). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A205YNDVU7CUI1: security patch 2022-03-01 instead of 2021-09-01. A newer build for SM-A205YN is available: A205YNDVS8CWC3.

Download firmware
8.9/10 (478)13,202 times
Android 11
OS Version
2022-03-22
First release
other regions until 2022-03-25
2022-03-01
Security patch
1
Countries
3
CSC codes
7
Bootloader binary

Bootloader binary 7. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A20 use bootloader binary 8 (latest: A205YNDVS8CWC3). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A205YNDVS7CVC1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A205YN
    TLP, VAP, XSA Australia
    		A205YNLDT7CUI2 2022-03-22 3.815 GiB
    SM-A205YN_2_20220307234840_05qw6m0rct_fac.zip

    No matching downloads

    How to flash A205YNDVS7CVC1

    • A205YNDVS7CVC1 has bootloader binary 7. Your device must run binary 7 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A205YNDVS7CVC1

    · The security of your device has been improved.

    Rollout of A205YNDVS7CVC1 by region

    First release
    March 22, 2022
    Last region
    March 25, 2022
    Duration
    4 days
    Regions
    3
    1. Day 1 · · 2 regions
      AustraliaTLPXSA
    2. Day 4 · · 1 region
      AustraliaVAP

    Device specifications

    • Display diagonal16.3 cm (6.4")
    • Display resolution720 x 1560 pixels
    • Display typeSAMOLED
    • RAM3 GB
    • Rear camera resolution13 MP
    • Rear camera typeDual camera
    • Battery capacity4000 mAh
    • Weight169 g

    Specifications of SM-A205F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A205YNDVS7CVC1 is Android 11 firmware for Samsung Galaxy A20, released for Australia (TLP, VAP, XSA). It includes the 2022-03-01 security patch. Samsung built it on 2022-03-22.

    No. A newer build for SM-A205YN is available: A205YNDVS8CWC3. Install it instead of A205YNDVS7CVC1 unless you need this exact version. The previous build was A205YNDVU7CUI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.815 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A20 must be on bootloader binary 7 or lower.

    This build uses bootloader binary 7. It can be flashed on a Samsung Galaxy A20 running binary 7 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A20

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Overall stability of your device has been improved.

    · The security of your device has been improved.

    • The security of your device has been improved.

    Show 13 older builds

    One UI 3.1 Upgrade (Android 11)
    One UI 3.1 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3.1 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing....

    • The security of your device has been improved.

    • Improved battery charging algorithm and stability

    · The security of your device has been improved.

    • The stability of Camera has been improved.
    • Improved battery charging algorithm and stability

    • Bluetooth connectivity and stability has been improved
    • The security of your device has been improved.

    One UI 2 upgrade with Android 10

    One UI 2 brings you Android 10, with exciting new features from Samsung and Google based on feedback from users like you.
    We recommend that you back up your important data to keep it safe during the upgrade.
    Some apps, including Calculator, Samsung Internet, Samsung Health and Samsung Notes, need to be updated individually after you update your OS.

    Here's what's new.

    Dark mode
    - Enhanced image, text, and color adjustments for day and night environments.
    - Dark...

    • Bluetooth connectivity and stability has been improved
    • The security of your device has been improved.

    · The security of your device has been improved.
    · The stability of Audio has been improved.

    · The stability of Knox Guard has been improved.
    · The security of your device has been improved.

    Model firmware by region