Samsung Galaxy A3 A300MUBS1BPL2
SM-A300M 4 countries Android 5.0.2 (Lollipop)

Samsung Galaxy A3 A300MUBS1BPL2 Firmware

Samsung Galaxy A3 A300MUBS1BPL2 is an Android 5.0.2 (Lollipop) firmware for 4 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A300MUBS1BPL1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A300M is available: A300MUBS1BRK5.

9.3/10 (453)38,673 times
Android 5.0.2 (Lollipop)
OS Version
2016-12-06
Build Date
n/a
Security patch
4
Countries
7
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-A300M
    ALE Ecuador
    		A300M1BOK1A300MUBS1BPL2 — — —
    SM-A300M
    CTI Argentina
    		A300MUWA1BPB1A300MUBS1BPL2 — — —
    SM-A300M
    CTU Uruguay
    		A300MUWA1BPB1A300MUBS1BPL2 — — —
    SM-A300M
    EBE Ecuador
    		A300M1BPB1A300MUBS1BPL2 — — —
    SM-A300M
    EBE Ecuador
    		A300MEBE1BPB1A300MUBU1BPB2 2017-02-01 854.721 MiB
    SM-A300M_1_20210320112235_m0xtj720jl_fac.zip
    SM-A300M
    ECO Ecuador
    		A300M1BPB1A300MUBS1BPL2 — — —
    SM-A300M
    ECO Ecuador
    		A300MECO1BPB1A300MUBU1BPB2 2017-02-03 909.325 MiB
    SM-A300M_1_20210115215004_bqdmva1v7m_fac.zip
    SM-A300M
    PSN Argentina
    		A300M1BPF1A300MUBS1BPL2 — — —
    SM-A300M
    ZTR Brazil
    		A300M1BPB1A300MUBS1BPL2 — — —

    No matching downloads

    Device specifications

    • Launched withAndroid 4.4
    • Display diagonal11.4 cm (4.5")
    • Display resolution540 x 960 pixels
    • Display typeSAMOLED
    • RAM1.5 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity1900 mAh
    • Weight110.3 g

    Specifications of SM-A300, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    How to flash A300MUBS1BPL2

    • A300MUBS1BPL2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A300MUBS1BPL2 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy A3, released for 4 countries, 7 CSC codes. Samsung built it on 2016-12-06.

    No. A newer build for SM-A300M is available: A300MUBS1BRK5. Install it instead of A300MUBS1BPL2 unless you need this exact version. The previous build was A300MUBS1BPL1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A3 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A3 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 45 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A3

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • Network connectivity enhancement.

    • Network connectivity enhancement.

    • Network connectivity enhancement.

    Show 15 older builds
    No changelog details available.
    No changelog details available.

    • Network connectivity enhancement.

    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    Model firmware by region