Samsung Galaxy A3 A300MUBS1BPL3
SM-A300M 9 countries Android 5.0.2 (Lollipop)

Samsung Galaxy A3 A300MUBS1BPL3 Firmware

Samsung Galaxy A3 A300MUBS1BPL3 is an Android 5.0.2 (Lollipop) firmware for 9 countries, 13 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A300MUBS1BPL2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A300M is available: A300MUBS1BRK5.

8.9/10 (454)56,399 times
Android 5.0.2 (Lollipop)
OS Version
2016-12-06
Build Date
n/a
Security patch
9
Countries
13
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    10
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-A300M
    ARO Argentina
    		A300MUUB1BPB1A300MUBS1BPL3 — — —
    SM-A300M
    BVO Bolivia
    UPO Uruguay
    		A300MUUB1BPB1A300MUBU1BPB2 2016-12-27 838.297 MiB
    SM-A300M_1_20210115215934_rs3ggw25gw_fac.zip
    SM-A300M
    COB Colombia
    UFN Argentina
    UFU Uruguay
    		A300MTFG1BPB1A300MUBU1BPB1 2017-01-31 867.94 MiB
    SM-A300M_1_20201216131804_so7v1xyexp_fac.zip
    SM-A300M
    COO Colombia
    		A300MUUB1BPB1A300MUBS1BPL3 — — —
    SM-A300M
    EON Trinidad & Tobago
    		A300MUUB1BPB1A300MUBS1BPL3 — — —
    SM-A300M
    NBS Nicaragua
    		A300MTFG1BPB1A300MUBS1BPL3 — — —
    SM-A300M
    TGU Guatemala
    		A300MTFG1BPB1A300MUBS1BPL3 — — —
    SM-A300M
    TPA Panama
    		A300MUUB1BPB1A300MUBS1BPL3 — — —
    SM-A300M
    TTT Trinidad & Tobago
    		A300MUUB1BPB1A300MUBS1BPL3 — — —
    SM-A300M
    ZTO Brazil
    		A300M1BOK1A300MUBS1BPL3 — — —

    No matching downloads

    How to flash A300MUBS1BPL3

    • A300MUBS1BPL3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of A300MUBS1BPL3 by region

    First release
    December 27, 2016
    Last region
    February 9, 2017
    Duration
    45 days
    Regions
    5
    1. Day 1 · · 2 regions
      BoliviaBVOUruguayUPO
    2. Day 36 · · 1 region
      ColombiaCOB
    3. Day 38 · · 1 region
      UruguayUFU
    4. Day 45 · · 1 region
      ArgentinaUFN

    Device specifications

    • Launched withAndroid 4.4
    • Display diagonal11.4 cm (4.5")
    • Display resolution540 x 960 pixels
    • Display typeSAMOLED
    • RAM1.5 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity1900 mAh
    • Weight110.3 g

    Specifications of SM-A300, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A300MUBS1BPL3 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy A3, released for 9 countries, 13 CSC codes. Samsung built it on 2016-12-06.

    No. A newer build for SM-A300M is available: A300MUBS1BRK5. Install it instead of A300MUBS1BPL3 unless you need this exact version. The previous build was A300MUBS1BPL2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A3 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A3 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 45 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A3

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • Network connectivity enhancement.

    No changelog details available.

    • Network connectivity enhancement.

    Show 12 older builds
    No changelog details available.
    Model firmware by region