Samsung Galaxy A3(2016) A310FXXU2APE2
SM-A310F 1 country Android 5.1.1 (Lollipop)

Samsung Galaxy A3(2016) A310FXXU2APE2 Firmware

Samsung Galaxy A3(2016) A310FXXU2APE2 is an Android 5.1.1 (Lollipop) firmware for United Kingdom (EVR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A310FXXU2APE1: Android updated from Android 5.1.1 (Nougat) to Android 5.1.1 (Lollipop). A newer build for SM-A310F is available: A310FXXS5CTK5.

Download firmware
9.0/10 (460)4,437 times
Android 5.1.1 (Lollipop)
OS Version
2016-05-19
Build Date
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A3(2016) use bootloader binary 5 (latest: A310FXXS5CTK5). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A310FXXU2APE2
    ModelRegionCSC VersionSizeFile nameDownload
    SM-A310F
    EVR United Kingdom
    		A310F2APE1 — — Download

    No matching downloads

    How to flash A310FXXU2APE2

    • A310FXXU2APE2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.1
    • Display diagonal11.9 cm (4.7")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • Processor frequency1.5 GHz
    • RAM1.5 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2300 mAh
    • Weight132 g

    Frequently Asked Questions

    A310FXXU2APE2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy A3(2016), released for United Kingdom (EVR). Samsung built it on 2016-05-19.

    No. A newer build for SM-A310F is available: A310FXXS5CTK5. Install it instead of A310FXXU2APE2 unless you need this exact version. The previous build was A310FXXU2APE1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A3(2016) must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy A3(2016) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 35 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A3(2016)

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    · The security of your device has been improved.

    No changelog details available.
    Show 8 older builds

    · The security of your device has been improved.

    No changelog details available.

    · The security of your device has been improved.

    · The stability of SMS has been improved.

    No changelog details available.
    Model firmware by region