Samsung Galaxy A42 5G A426NKSS7EXK1
SM-A426N 1 country Android 13

Samsung Galaxy A42 5G A426NKSS7EXK1 Firmware

Samsung Galaxy A42 5G A426NKSS7EXK1 is an Android 13 firmware for South Korea (KOO, KTC, LUC, SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A426NKSU6EXF3: bootloader binary raised from 6 to 7, so after installing it there is no way back to older builds. This is the newest build for SM-A426N.

Download firmware
8.9/10 (373)9,027 times
Android 13
OS Version
2024-11-28
Build Date
1
Countries
4
CSC codes
7
Bootloader binary

Bootloader binary 7. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A426NKOS7EXJ1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A426N
    KOO, KTC, LUC, SKC South Korea
    		A426NOKR7EXK1 2024-11-28 5.493 GiB
    SM-A426N_3_20241113084140_6anvrdfqnr_fac.zip
    		Download

    No matching downloads

    How to flash A426NKSS7EXK1

    • A426NKSS7EXK1 has bootloader binary 7. Your device must run binary 7 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of A426NKSS7EXK1 by region

    Samsung released this build in all regions (4) on the same day, November 28, 2024.

    Device specifications

    • Launched withAndroid 10.0
    • Display diagonal16.8 cm (6.6")
    • Display resolution720 x 1600 pixels
    • Display typeSAMOLED
    • RAM4 GB
    • Rear camera resolution48 MP
    • Rear camera typeQuad camera
    • Battery capacity5000 mAh
    • Weight193 g

    Specifications of SM-A426B, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A426NKSS7EXK1 is Android 13 firmware for Samsung Galaxy A42 5G, released for South Korea (KOO, KTC, LUC, SKC). Samsung built it on 2024-11-28.

    Yes. A426NKSS7EXK1 is the newest build for SM-A426N on SamFirm. The previous build was A426NKSU6EXF3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 5.493 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A42 5G must be on bootloader binary 7 or lower.

    This build uses bootloader binary 7. It can be flashed on a Samsung Galaxy A42 5G running binary 7 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 7.

    Other builds and changelog for Samsung Galaxy A42 5G

    No changelog details available.
    Model firmware by region