Samsung Galaxy A5 A500MUBS1CRI1
SM-A500M 2 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy A5 A500MUBS1CRI1 Firmware

Samsung Galaxy A5 A500MUBS1CRI1 is an Android 6.0.1 (Marshmallow) firmware for Trinidad & Tobago (EON), Uruguay (UPO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A500MUBS1CRH7, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A500M is available: A500MUBS1CRJ1.

Download firmware
8.9/10 (455)22,384 times
Android 6.0.1 (Marshmallow)
OS Version
2018-09-03
First release
other regions until 2021-01-27
2
Countries
2
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-A500M
    EON Trinidad & Tobago
    UPO Uruguay
    		A500MUUB1CRH1A500MUBU1CTI2 2021-01-27 2021-01-27 1.79 GiB
    SM-A500M_1_20210127105235_3r5tkmorkt_fac.zip
    		Download
    SM-A500M
    EON Trinidad & Tobago
    UPO Uruguay
    		A500MUUB1CRH1A500MUBU1CPH2 2019-01-07 2018-12-12 1.79 GiB
    SM-A500M_1_20181211212927_4oc2vjz0o7_fac.zip
    		Download
    SM-A500M
    UPO Uruguay
    		A500MUUB1CRH1A500MUBS1CRI1 2018-09-03 2021-01-27 — — Download

    No matching downloads

    How to flash A500MUBS1CRI1

    • A500MUBS1CRI1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A500MUBS1CRI1

    • Improved battery usage time
    • Overall device performance has been improved.
    • The security of your device has been improved.

    Rollout of A500MUBS1CRI1 by region

    First release
    December 12, 2018
    Last region
    January 7, 2019
    Duration
    27 days
    Regions
    2
    1. Day 1 · · 1 region
      UruguayUPO
    2. Day 27 · · 1 region
      Trinidad & TobagoEON

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity2300 mAh
    • Weight123 g

    Specifications of SM-A500F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A500MUBS1CRI1 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy A5, released for Trinidad & Tobago (EON), Uruguay (UPO). Samsung built it on 2018-09-03.

    No. A newer build for SM-A500M is available: A500MUBS1CRJ1. Install it instead of A500MUBS1CRI1 unless you need this exact version. The previous build was A500MUBS1CRH7.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A5 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A5 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 55 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A5

    • Improved battery usage time
    • Overall device performance has been improved.
    • The security of your device has been improved.

    No changelog details available.

    • Improved battery usage time
    • Overall device performance has been improved.
    • The security of your device has been improved.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 4 older builds
    No changelog details available.
    Model firmware by region