Samsung Galaxy A50s A507FNXXS6DVC3

Samsung Galaxy A50s A507FNXXS6DVC3 Firmware

Samsung Galaxy A50s A507FNXXS6DVC3 is an Android 11 firmware for 12 countries, 14 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A507FNXXU6DVA2 https://samfirm.shop/build/A507FNXXU6DVA2: security patch 2022-04-01 instead of 2022-02-01. A newer build for SM-A507FN is available: A507FNXXS7DWD1 https://samfirm.shop/build/A507FNXXS7DWD1.

Download firmware
8.8/10 (480)61,822 times
Android 11
OS Version
2022-04-04
First release
other regions until 2022-05-11
2022-04-01
Security patch
12
Countries
14
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A50s use bootloader binary 7 (latest: A507FNXXS7DWD1 https://samfirm.shop/build/A507FNXXS7DWD1). If your device already runs binary 7, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    3
    MODEM/CP Version: A507FNXXS6DVC1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-A507FN
    BKD Bangladesh
    INS India
    NPB Nepal
    SLK Sri Lanka
    A507FNODM6DVA2 2022-05-11 2022-05-11 4.598 GiB
    SM-A507FN_2_20220405184121_fh5px3e1pv_fac.zip
    SM-A507FN
    CAM Cambodia
    GLB, SMA, XTC Philippines
    LAO Laos
    MYM Myanmar (Burma)
    +3 more countries
    THL Thailand
    XME Malaysia
    XXV Vietnam
    A507FNOLM6DVC3 2022-04-04 2022-04-04 4.48 GiB
    SM-A507FN_2_20220325133430_5w2gg02x6m_fac.zip
    SM-A507FN
    XID Indonesia
    A507FNOLE6DVC3 2022-04-04 2022-04-05 4.442 GiB
    SM-A507FN_2_20220328131931_1eun3g7i96_fac.zip

    No matching downloads

    How to flash A507FNXXS6DVC3

    • A507FNXXS6DVC3 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A507FNXXS6DVC3

    • The security of your device has been improved.

    Rollout of A507FNXXS6DVC3 by region

    First release
    April 4, 2022
    Last region
    May 11, 2022
    Duration
    38 days
    Regions
    14
    1. Day 1 · · 1 region
      VietnamXXV
    2. Day 2 · · 9 regions
      CambodiaCAMIndonesiaXIDLaosLAOMalaysiaXMEMyanmar (Burma)MYMPhilippinesGLBSMAXTCThailandTHL
    3. Day 38 · · 4 regions
      BangladeshBKDIndiaINSNepalNPBSri LankaSLK

    Frequently Asked Questions

    A507FNXXS6DVC3 is Android 11 firmware for Samsung Galaxy A50s, released for 12 countries, 14 CSC codes. It includes the 2022-04-01 security patch. Samsung built it on 2022-04-04.

    No. A newer build for SM-A507FN is available: A507FNXXS7DWD1. Install it instead of A507FNXXS6DVC3 unless you need this exact version. The previous build was A507FNXXU6DVA2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A50s must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy A50s running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A50s

    https://samfirm.shop/build/A507FNXXS7DWD1

    · The security of your device has been improved.

    • The security of your device has been improved.

    • Overall stability of your device has been improved.

    https://samfirm.shop/build/A507FNXXU6DVE4

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • The security of your device has been improved.

    Show 15 older builds
    https://samfirm.shop/build/A507FNXXU6DVA2

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    https://samfirm.shop/build/A507FNXXU5DUE2

    • Added new feature. - Quick Share
    • The security of your device has been improved.

    https://samfirm.shop/build/A507FNXXU5DUD1

    • Overall stability of functions improved.
    • The security of your device has been improved.

    https://samfirm.shop/build/A507FNXXU5DUC2

    • The security of your device has been improved.

    One UI 3 Upgrade (Android 11)

    One UI 3 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing.

    Sc...

    https://samfirm.shop/build/A507FNXXU5CUB3

    • The performance of Camera has been improved
    • The security of your device has been improved.

    https://samfirm.shop/build/A507FNXXU5CTK4

    Wi-Fi
    - If quality information on nearby Wi-Fi routers can be measured, this information will appear as  Very Fast, Fast, Normal, or Slow.
      * This feature can be turned on or off in "Network Quality Information Display" settings.
    - When attempting to access a Wi-Fi router with a password, a newly added feature now allows the user to request the password of the Wi-Fi router from someone nearby who is saved in their contact list and has already connected to that router.
      * The "Request Passwo...

    https://samfirm.shop/build/A507FNXXS5BTI3

    • The security of your device has been improved.

    https://samfirm.shop/build/A507FNXXS5BTI1

    · The security of your device has been improved.

    https://samfirm.shop/build/A507FNXXU5BTH3

    • The security of your device has been improved.