Samsung Galaxy A5(2017) A520FXXU0APJB
SM-A520F 5 countries Android 8.0.0 (Oreo)

Samsung Galaxy A5(2017) A520FXXU0APJB Firmware

Samsung Galaxy A5(2017) A520FXXU0APJB is an Android 8.0.0 (Oreo) firmware for 5 countries, 6 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-A520F is available: A520FXXUGCZC8.

Download firmware
9.2/10 (459)26,110 times
Android 8.0.0 (Oreo)
OS Version
5
Countries
6
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A5(2017) use bootloader binary G (16) (latest: A520FXXUGCZC8). If your device already runs binary G (16), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: A520FXXU0APJB
    ModelRegionCSC VersionSizeFile nameDownload
    SM-A520F
    ARO Argentina
    		A520FUUB0APK1 — — Download
    SM-A520F
    CHO Chile
    		A520FUUB0APK1 — — Download
    SM-A520F
    TPA Panama
    		A520FUUB0APK1 — — Download
    SM-A520F
    TTT Trinidad & Tobago
    		A520FUUB0APK1 — — Download
    SM-A520F
    UPO Uruguay
    		A520FUUB0APK1 — — Download
    SM-A520F
    UYO Uruguay
    		A520FUUB0APK1 — — Download

    No matching downloads

    How to flash A520FXXU0APJB

    • A520FXXU0APJB has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal13.2 cm (5.2")
    • Display resolution1920 x 1080 pixels
    • Display typeSAMOLED
    • Processor frequency1.9 GHz
    • Processor familySamsung Exynos
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3000 mAh
    • Weight159 g

    Frequently Asked Questions

    A520FXXU0APJB is Android 8.0.0 (Oreo) firmware for Samsung Galaxy A5(2017), released for 5 countries, 6 CSC codes.

    No. A newer build for SM-A520F is available: A520FXXUGCZC8. Install it instead of A520FXXU0APJB unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A5(2017) must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy A5(2017) running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 0.

    Other builds and changelog for Samsung Galaxy A5(2017)

    No changelog details available.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    No changelog details available.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    No changelog details available.
    Model firmware by region