Samsung Galaxy A6+ A605FJXU6CTH1
SM-A605F 15 countries Android 10

Samsung Galaxy A6+ A605FJXU6CTH1 Firmware

Samsung Galaxy A6+ A605FJXU6CTH1 is an Android 10 firmware for 15 countries, 19 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A605FJXS5CTF1: bootloader binary raised from 5 to 6, so after installing it there is no way back to older builds; security patch 2020-08-01 instead of 2020-06-01. A newer build for SM-A605F is available: A605FJXS8CVE1.

Download firmware
8.7/10 (458)83,101 times
Android 10
OS Version
2020-08-24
First release
other regions until 2020-12-06
2020-08-01
Security patch
15
Countries
19
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A6+ use bootloader binary 8 (latest: A605FJXS8CVE1). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    2
    MODEM/CP Version: A605FNXXU6CTG1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-A605F
    ACR Saudi Arabia
    AFG Afghanistan
    AFR Kenya
    BTC, LYS Libya
    +9 more countries
    ECT Nigeria
    EGY Egypt
    MID Iraq
    MWD Morocco
    PAK Pakistan
    THR Iran
    TUN Tunisia
    TUR Turkey
    XSG United Arab Emirates
    		A605FOJM6CTH1 2020-12-06 2020-09-30 3.01 GiB
    SM-A605F_2_20200915195134_2r7wfykyw4_fac.zip
    		Download
    SM-A605F
    DKR Kenya
    KSA Saudi Arabia
    XFA, XFE South Africa
    TKD
    		A605FOJM6CTH1 2020-11-21 2020-11-21 3.048 GiB
    SM-A605F_2_20220516110030_6ms2htgi5d_fac.zip
    		Download

    No matching downloads

    How to flash A605FJXU6CTH1

    • A605FJXU6CTH1 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A605FJXU6CTH1

    • The security of your device has been improved.

    Rollout of A605FJXU6CTH1 by region

    First release
    September 30, 2020
    Last region
    December 7, 2020
    Duration
    69 days
    Regions
    19
    1. Day 1 · · 1 region
      United Arab EmiratesXSG
    2. Day 23 · · 12 regions
      AfghanistanAFGEgyptEGYIranTHRIraqMIDLibyaBTCLYSMoroccoMWDNigeriaECTPakistanPAKSaudi ArabiaACRTunisiaTUNTurkeyTUR
    3. Day 53 · · 5 regions
      KenyaDKRSaudi ArabiaKSASouth AfricaXFAXFETKD
    4. Day 69 · · 1 region
      KenyaAFR

    Device specifications

    • Display diagonal15.2 cm (6")
    • Display resolution2220 x 1080 pixels
    • Display typeSAMOLED
    • Processor frequency1.8 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeDual camera
    • SIM cardsDual SIM
    • Battery capacity3500 mAh
    • Weight191 g

    Frequently Asked Questions

    A605FJXU6CTH1 is Android 10 firmware for Samsung Galaxy A6+, released for 15 countries, 19 CSC codes. It includes the 2020-08-01 security patch. Samsung built it on 2020-08-24.

    No. A newer build for SM-A605F is available: A605FJXS8CVE1. Install it instead of A605FJXU6CTH1 unless you need this exact version. The previous build was A605FJXS5CTF1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A6+ must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy A6+ running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 6.

    Other builds and changelog for Samsung Galaxy A6+

    • The security of your device has been improved.

    · Security patch update

    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    One UI 2 upgrade with Android 10

    One UI 2 brings you Android 10, with exciting new features from Samsung and Google based on feedback from users like you.
    We recommend that you back up your important data to keep it safe during the upgrade.
    Some apps, including Calculator, Samsung Internet, Samsung Health and Samsung Notes, need to be updated individually after you update your OS.

    Here's what's new.

    Dark mode
    - Enhanced image, text, and color adjustments for day and night environments.
    - Dark...

    Show 12 older builds

    · The security of your device has been improved.

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    · The security of your device has been improved.

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    · The security of your device has been improved.

    Upgraded One UI for Android Pie

    One UI brings you Android Pie, with exciting new features and a whole new look and feel based on feedback from users in Samsung and Google.
    We recommend that you back up your important data to keep it safe before the upgrade.
    Some apps, including Calculator, Samsung Internet, Samsung Health, Samsung Notes, Samsung Members, and Samsung Pay, need to be updated individually after you update your OS.
    To use the Remote unlock function in Find My Mobile on an Android P...

    · The security of your device has been improved.

    · Bluetooth connectivity and stability has been improved
    · The stability of Messages has been improved.
    · Overall device performance has been improved.
    · The security of your device has been improved.

    · The performance of Camera has been improved
    · Wi-Fi connectivity and stability have been improved.

    No changelog details available.
    Model firmware by region