Samsung Galaxy A7 A700FDXXU1BPC2
SM-A700FD 1 country Android 5.0.2 (Lollipop)

Samsung Galaxy A7 A700FDXXU1BPC2 Firmware

Samsung Galaxy A7 A700FDXXU1BPC2 is an Android 5.0.2 (Lollipop) firmware for Brazil (ZTM). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A700FDDDU1BPB1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A700FD is available: A700FDXXS1CSB1.

8.7/10 (27)4,637 times
Android 5.0.2 (Lollipop)
OS Version
2016-03-24
First release
other regions until 2016-04-10
n/a
Security patch
1
Countries
1
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-A700FD
    ZTM Brazil
    		A700FDZTM1BPC1A700FDXXU1BOJ1 2016-04-10 2016-04-11 1.436 GiB
    SM-A700FD_1_20160410215601_bneochy9uv_fac.zip
    SM-A700FD
    ZTM Brazil
    		A700FD1BPC1A700FDXXU1BPC2 2016-03-24 — — —

    No matching downloads

    How to flash A700FDXXU1BPC2

    • A700FDXXU1BPC2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal14 cm (5.5")
    • Display resolution1080 x 1920 pixels
    • Display typeSAMOLED
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity2600 mAh
    • Weight141 g

    Specifications of SM-A700F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A700FDXXU1BPC2 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy A7, released for Brazil (ZTM). Samsung built it on 2016-03-24.

    No. A newer build for SM-A700FD is available: A700FDXXS1CSB1. Install it instead of A700FDXXU1BPC2 unless you need this exact version. The previous build was A700FDDDU1BPB1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.436 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A7 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A7 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 46 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A7

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region