Samsung Galaxy A7 A700LKLU1AOC3 Firmware
Samsung Galaxy A7 A700LKLU1AOC3 is an Android 4.4.4 (Marshmallow) firmware for South Korea (LUC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-A700L is available: A700LKLS1CRL1 https://samfirm.shop/build/A700LKLS1CRL1.
Android 4.4.4 (Marshmallow)
OS Version
2015-03-24
Build Date
1
Countries
1
CSC codes
1
Bootloader binary
Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
| Model | Region | CSC Version | MODEM/CP Version | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|
| SM-A700L |
LUC South Korea | A700L1AOC3 | A700LKLU1AOC3 | — | — | — | Download |
| SM-A700L |
LUC South Korea | A700LLUC1AOC3 | A700LKLU1AOC1 | 2015-03-31 | 1.974 GiB | SM-A700L_1_20190109095814_assx3jbuti_fac.zip | Download |
No matching downloads
How to flash A700LKLU1AOC3
- A700LKLU1AOC3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Device specifications
- Display diagonal14 cm (5.5")
- Display resolution1080 x 1920 pixels
- Display typeSAMOLED
- RAM2 GB
- Rear camera resolution13 MP
- Rear camera typeSingle camera
- Battery capacity2600 mAh
- Weight141 g
Specifications of SM-A700F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.
Frequently Asked Questions
A700LKLU1AOC3 is Android 4.4.4 (Marshmallow) firmware for Samsung Galaxy A7, released for South Korea (LUC). Samsung built it on 2015-03-24.
No. A newer build for SM-A700L is available: A700LKLS1CRL1. Install it instead of A700LKLU1AOC3 unless you need this exact version.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.974 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A7 must be on bootloader binary 1 or lower.
This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A7 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 11 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy A7
No changelog details available.
- A700LKLS1CRL1Dec 5, 2018
- A700LKLU1CQA1Jan 16, 2017
- A700LKLU1CPK2Nov 3, 2016
- A700LKLU1CPJ3Oct 13, 2016
- A700LKLU1CPH4Aug 11, 2016
- A700LKLU1BPB4Feb 18, 2016
- A700LKLU1BOL2Dec 17, 2015
- A700LKLU1BOK3Nov 26, 2015
- A700LKLU1BOJ4Oct 27, 2015
- A700LKLU1BOH6Aug 17, 2015
- A700LKLU1AOE1May 11, 2015
- A700LKLU1AOC3Mar 24, 2015