Samsung Galaxy A7 A710FXXS2CTI2
SM-A710FD 1 country Android 7.0

Samsung Galaxy A7 A710FXXS2CTI2 Firmware

Samsung Galaxy A7 A710FXXS2CTI2 is an Android 7.0 firmware for Bangladesh (BNG). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A710FXXU2CRL1: Android updated from Android 7.0 (Nougat) to Android 7.0. A newer build for SM-A710FD is available: A710FXXS2CTL2.

Download firmware
8.9/10 (22)154 times
Android 7.0
OS Version
2020-10-28
Build Date
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A710FDXXU2CRI1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A710FD
    BNG Bangladesh
    		A710FDODD2CTI4 2020-10-29 1.644 GiB
    SM-A710FD_1_20201028204834_tvexqt1827_fac.zip
    		Download

    No matching downloads

    How to flash A710FXXS2CTI2

    • A710FXXS2CTI2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.1
    • Display diagonal14 cm (5.5")
    • Display resolution1920 x 1080 pixels
    • Display typeSAMOLED
    • RAM3 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity3300 mAh
    • Weight172 g

    Specifications of SM-A710F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A710FXXS2CTI2 is Android 7.0 firmware for Samsung Galaxy A7, released for Bangladesh (BNG). Samsung built it on 2020-10-28.

    No. A newer build for SM-A710FD is available: A710FXXS2CTL2. Install it instead of A710FXXS2CTI2 unless you need this exact version. The previous build was A710FXXU2CRL1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.644 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A7 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy A7 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 13 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A7

    No changelog details available.

    • The security of your device has been improved.

    No changelog details available.
    Model firmware by region