Samsung Galaxy A8+(2018) A730FXXU2ARE2
SM-A730F 13 countries Android 7.1.1 (Nougat)

Samsung Galaxy A8+(2018) A730FXXU2ARE2 Firmware

Samsung Galaxy A8+(2018) A730FXXU2ARE2 is an Android 7.1.1 (Nougat) firmware for 13 countries, 16 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A730FXXU2ARE1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A730F is available: A730FXXU7CZC1.

Download firmware
9.2/10 (477)69,139 times
Android 7.1.1 (Nougat)
OS Version
2018-05-15
Build Date
13
Countries
16
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A8+(2018) use bootloader binary 7 (latest: A730FXXU7CZC1). If your device already runs binary 7, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A730FXXU2ARE1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A730F
    ACR, KSA Saudi Arabia
    AFG Afghanistan
    AFR Kenya
    BTC, LYS Libya
    +9 more countries
    ECT Nigeria
    EGY Egypt
    MAT, MWD Morocco
    MID Iraq
    PAK Pakistan
    THR Iran
    TUN Tunisia
    TUR Turkey
    XSG United Arab Emirates
    		A730FOJM2ARE1 2018-05-28 2.968 GiB
    SM-A730F_1_20211018203748_5a7mu7l2wd_fac.zip
    MD5:9b622820b740195a04a4a68afb69132f
    SHA1:68d2534dc63403cf3e05be15eae04a1766a9e9c1

    No matching downloads

    How to flash A730FXXU2ARE2

    • A730FXXU2ARE2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A730FXXU2ARE2

    · The security of your device has been improved.

    Rollout of A730FXXU2ARE2 by region

    First release
    May 28, 2018
    Last region
    June 22, 2018
    Duration
    26 days
    Regions
    16
    1. Day 1 · · 3 regions
      IraqMIDTurkeyTURUnited Arab EmiratesXSG
    2. Day 25 · · 7 regions
      EgyptEGYKenyaAFRLibyaBTCLYSNigeriaECTSaudi ArabiaACRTunisiaTUN
    3. Day 26 · · 6 regions
      AfghanistanAFGIranTHRMoroccoMATMWDPakistanPAKSaudi ArabiaKSA

    Device specifications

    • Launched withAndroid 7.1.1
    • Display diagonal15.2 cm (6")
    • Display resolution2220 x 1080 pixels
    • Display typeSAMOLED
    • Processor frequency2.2 GHz
    • Processor familySamsung Exynos
    • Processor model7885
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3500 mAh
    • Weight191 g

    Frequently Asked Questions

    A730FXXU2ARE2 is Android 7.1.1 (Nougat) firmware for Samsung Galaxy A8+(2018), released for 13 countries, 16 CSC codes. Samsung built it on 2018-05-15.

    No. A newer build for SM-A730F is available: A730FXXU7CZC1. Install it instead of A730FXXU2ARE2 unless you need this exact version. The previous build was A730FXXU2ARE1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.968 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A8+(2018) must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy A8+(2018) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 20 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A8+(2018)

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Overall stability of your device has been improved.

    • An emergency alert (Emergency Cell Broadcast) feature has been added in Ukraine.

    · The security of your device has been improved.

    • The security of your device has been improved.

    Show 14 older builds

    · The security of your device has been improved.

    • Added new feature. - Google RCS(Rich Communication Service)
    • The security of your device has been improved.

    • LGPD (General Personal Data Protection Law) has been applied.
    • The security of your device has been improved.

    · The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · The security of your device has been improved.

    • The security of your device has been improved.

    • The stability of Game Tools has been improved.
    • The security of your device has been improved.

    No changelog details available.
    Model firmware by region