Samsung Galaxy A80 A805NKSU1ASJ8

Samsung Galaxy A80 A805NKSU1ASJ8 Firmware

Samsung Galaxy A80 A805NKSU1ASJ8 is an Android 9 firmware for South Korea (SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-A805N is available: A805NKSU2DXE1 https://samfirm.shop/build/A805NKSU2DXE1.

Download firmware
9.4/10 (461)4,331 times
Android 9
OS Version
2019-10-30
Build Date
1
Countries
1
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A80 use bootloader binary 2 (latest: A805NKSU2DXE1 https://samfirm.shop/build/A805NKSU2DXE1). If your device already runs binary 2, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A805NKSU1ASJ8
    ModelRegionCSC VersionSizeFile nameDownload
    SM-A805N
    SKC South Korea
    A805NOKR1ASJ8 — — Download

    No matching downloads

    How to flash A805NKSU1ASJ8

    • A805NKSU1ASJ8 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal17 cm (6.7")
    • Display resolution1080 x 2400 pixels
    • Display typeSAMOLED
    • RAM8 GB
    • Rear camera resolution48 MP
    • Rear camera typeTriple camera
    • Battery capacity3700 mAh
    • Weight220 g

    Specifications of SM-A805F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A805NKSU1ASJ8 is Android 9 firmware for Samsung Galaxy A80, released for South Korea (SKC). Samsung built it on 2019-10-30.

    No. A newer build for SM-A805N is available: A805NKSU2DXE1. Install it instead of A805NKSU1ASJ8 unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A80 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A80 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A80

    https://samfirm.shop/build/A805NKSU2DXE1
    No changelog details available.