Samsung Galaxy A9 (2018) A920FPUS4CTH3
SM-A920F 1 country Android 10

Samsung Galaxy A9 (2018) A920FPUS4CTH3 Firmware

Samsung Galaxy A9 (2018) A920FPUS4CTH3 is an Android 10 firmware for Russia (SER). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A920FXXS4CTH3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A920F is available: A920FXXU7CWC3.

9.4/10 (458)8,737 times
Android 10
OS Version
2020-08-28
First release
other regions until 2020-09-22
2020-09-01
Security patch
1
Countries
1
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A9 (2018) use bootloader binary 7 (latest: A920FXXU7CWC3). If your device already runs binary 7, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-A920F
    SER Russia
    		A920FSER4CTH1A920FXXS4CTH3 2020-09-22 2020-09-22 3.809 GiB
    SM-A920F_2_20200908192434_amght0c8ur_fac.zip
    SM-A920F
    SER Russia
    		A920F4CTH1A920FPUS4CTH3 2020-08-28 2020-09-23 — —

    No matching downloads

    How to flash A920FPUS4CTH3

    • A920FPUS4CTH3 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A920FPUS4CTH3

    • The security of your device has been improved.

    Device specifications

    • Launched withAndroid 8.0
    • Display diagonal16 cm (6.3")
    • Display resolution2220 x 1080 pixels
    • Display typeSAMOLED
    • Processor frequency2.2 GHz
    • Processor familyQualcomm Snapdragon
    • Processor modelSDM660
    • RAM6 GB
    • Rear camera resolution24 MP
    • Rear camera typeQuad camera
    • SIM cardsDual SIM
    • Battery capacity3720 mAh
    • Weight183 g

    Frequently Asked Questions

    A920FPUS4CTH3 is Android 10 firmware for Samsung Galaxy A9 (2018), released for Russia (SER). It includes the 2020-09-01 security patch. Samsung built it on 2020-08-28.

    No. A newer build for SM-A920F is available: A920FXXU7CWC3. Install it instead of A920FPUS4CTH3 unless you need this exact version. The previous build was A920FXXS4CTH3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.809 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A9 (2018) must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy A9 (2018) running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 25 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A9 (2018)

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • The security of your device has been improved.

    · Security patch update

    • The security of your device has been improved.

    Model firmware by region