Samsung Galaxy A9 (2018) A920FXXS6CVE2
SM-A920F 4 countries Android 10

Samsung Galaxy A9 (2018) A920FXXS6CVE2 Firmware

Samsung Galaxy A9 (2018) A920FXXS6CVE2 is an Android 10 firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A920FPUS6CVE1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A920F is available: A920FXXU7CWC3.

Download firmware
9.2/10 (460)17,583 times
Android 10
OS Version
2022-05-31
Build Date
2022-01-01
Security patch
4
Countries
4
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A9 (2018) use bootloader binary 7 (latest: A920FXXU7CWC3). If your device already runs binary 7, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A920FXXS6CVE1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A920F
    BNG Bangladesh
    INS India
    NPL Nepal
    SLK Sri Lanka
    		A920FODM6CVE2 2022-06-02 4.053 GiB
    SM-A920F_2_20220518182330_wyc4brbvsw_fac.zip
    		Download

    No matching downloads

    How to flash A920FXXS6CVE2

    • A920FXXS6CVE2 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A920FXXS6CVE2

    • The security of your device has been improved.

    Rollout of A920FXXS6CVE2 by region

    Samsung released this build in all regions (4) on the same day, June 2, 2022.

    Device specifications

    • Launched withAndroid 8.0
    • Display diagonal16 cm (6.3")
    • Display resolution2220 x 1080 pixels
    • Display typeSAMOLED
    • Processor frequency2.2 GHz
    • Processor familyQualcomm Snapdragon
    • Processor modelSDM660
    • RAM6 GB
    • Rear camera resolution24 MP
    • Rear camera typeQuad camera
    • SIM cardsDual SIM
    • Battery capacity3720 mAh
    • Weight183 g

    Frequently Asked Questions

    A920FXXS6CVE2 is Android 10 firmware for Samsung Galaxy A9 (2018), released for 4 countries, 4 CSC codes. It includes the 2022-01-01 security patch. Samsung built it on 2022-05-31.

    No. A newer build for SM-A920F is available: A920FXXU7CWC3. Install it instead of A920FXXS6CVE2 unless you need this exact version. The previous build was A920FPUS6CVE1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 4.053 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A9 (2018) must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy A9 (2018) running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A9 (2018)

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • The security of your device has been improved.

    · Security patch update

    • The security of your device has been improved.

    Model firmware by region