Samsung Galaxy S 4 (Korea) E300SKSUGPE2 Firmware
Samsung Galaxy S 4 (Korea) E300SKSUGPE2 is an Android 5.0.1 (KitKat) firmware for South Korea (SKT). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build E300SKSUGOL5 https://samfirm.shop/build/E300SKSUGOL5: Android updated from Android 5.0.1 (Lollipop) to Android 5.0.1 (KitKat). A newer build for SHV-E300S is available: E300SKSUGPI1 https://samfirm.shop/build/E300SKSUGPI1.
Android 5.0.1 (KitKat)
OS Version
2016-05-16
First release
other regions until 2016-05-25
1
Countries
1
CSC codes
U (30)
Bootloader binary
Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
| Model | Region | CSC Version | MODEM/CP Version | Build Date | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|---|
| SHV-E300S |
SKT South Korea | E300SSKTGPE2 | E300SKSUBPD1 | 2016-05-25 | 2016-05-26 | 1.791 GiB | SHV-E300S_2_20160525152801_lxr9ypuayr_fac.zip | Download |
| SHV-E300S |
SKT South Korea | E300SGPE2 | E300SKSUGPE2 | 2016-05-16 | — | — | — | Download |
No matching downloads
How to flash E300SKSUGPE2
- E300SKSUGPE2 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Frequently Asked Questions
E300SKSUGPE2 is Android 5.0.1 (KitKat) firmware for Samsung Galaxy S 4 (Korea), released for South Korea (SKT). Samsung built it on 2016-05-16.
No. A newer build for SHV-E300S is available: E300SKSUGPI1. Install it instead of E300SKSUGPE2 unless you need this exact version. The previous build was E300SKSUGOL5.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.791 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S 4 (Korea) must be on bootloader binary U (30) or lower.
This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy S 4 (Korea) running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 10 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy S 4 (Korea)
No changelog details available.
- E300SKSUGPI1Sep 19, 2016
- E300SKSUGPE2May 16, 2016
- E300SKSUGOL5Dec 24, 2015
- E300SKSUGOJ2Oct 7, 2015
- E300SKSUGOF3Jun 5, 2015
- E300SKSUGOC8Mar 21, 2015
- E300SKSUFNL3Dec 26, 2014
- E300SKSUFNJ1Oct 4, 2014
- E300SKSUFNG7Jul 28, 2014
- E300SKSUENA2Jan 5, 2014
- E300SKSUEML1Dec 16, 2013
- E300SKSEGPI1