Samsung Galaxy E7 E700MUBS1BPL1
SM-E700M 4 countries Android 5.1.1 (Lollipop)

Samsung Galaxy E7 E700MUBS1BPL1 Firmware

Samsung Galaxy E7 E700MUBS1BPL1 is an Android 5.1.1 (Lollipop) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build E700MUBU1BPC1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-E700M is available: E700MUBS1BRJ1.

9.0/10 (473)21,616 times
Android 5.1.1 (Lollipop)
OS Version
2016-11-29
First release
other regions until 2016-12-16
n/a
Security patch
4
Countries
4
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-E700M
    CPA Panama
    		E700MUWA1BPC1E700MUBU1BPC1 2016-11-29 2017-02-03 1.369 GiB
    SM-E700M_1_20181211095719_d3nm0ys0vk_fac.zip
    SM-E700M
    SAM Peru
    		E700MTFG1BPD1E700MUBU1BPC1 2016-11-29 2017-02-10 1.343 GiB
    SM-E700M_1_20181211100053_duskc11305_fac.zip
    SM-E700M
    TTT Trinidad & Tobago
    		E700MUUB1BPD1E700MUBU1BPC1 2016-12-16 2016-12-16 1.269 GiB
    SM-E700M_1_20161216125926_vvtl7x2faj_fac.zip
    SM-E700M
    TTT Trinidad & Tobago
    		E700MUUB1BPD1E700MUBS1BPL1 2016-11-29 — — —
    SM-E700M
    ZTO Brazil
    		E700MZTO1BPD2E700MUBU1BPC1 2016-12-16 2016-12-16 1.347 GiB
    SM-E700M_1_20161216131926_o52y7lo9rj_fac.zip
    SM-E700M
    ZTO Brazil
    		E700M1BPD2E700MUBS1BPL1 2016-11-29 — — —

    No matching downloads

    Device specifications

    • Display diagonal14 cm (5.5")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity2950 mAh
    • Weight141 g

    Specifications of SM-E700H, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Rollout of E700MUBS1BPL1 by region

    First release on December 16, 2016: TTT (Trinidad & Tobago), ZTO (Brazil). Regions in total: 4, the rollout took 56 days, the last region got the build on February 10, 2017.

    • 2016-12-16 TTT (Trinidad & Tobago), ZTO (Brazil)
    • 2017-02-03 CPA (Panama)
    • 2017-02-10 SAM (Peru)

    How to flash E700MUBS1BPL1

    • E700MUBS1BPL1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    E700MUBS1BPL1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy E7, released for 4 countries, 4 CSC codes. Samsung built it on 2016-11-29.

    No. A newer build for SM-E700M is available: E700MUBS1BRJ1. Install it instead of E700MUBS1BPL1 unless you need this exact version. The previous build was E700MUBU1BPC1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy E7 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy E7 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 17 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy E7

    No changelog details available.
    Model firmware by region