SM-E700M 4 countries Android 5.1.1 (Lollipop)

Samsung Galaxy E7 E700MUBS1BRI2 Firmware

Name: Samsung Galaxy E7 (SM-E700M)
Brand: Samsung
Availability: InStock

Samsung Galaxy E7 E700MUBS1BRI2 is an Android 5.1.1 (Lollipop) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build E700MUBS1BQA1 https://samfirm.shop/build/E700MUBS1BQA1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-E700M is available: E700MUBS1BRJ1 https://samfirm.shop/build/E700MUBS1BRJ1.

8.9/10 (452)21,709 times

Android 5.1.1 (Lollipop)

OS Version

2018-09-25

First release

other regions until 2018-12-11

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name
SM-E700M	CHL Chile	E700MUWA1BRH4	E700MUBU1BPC1	—	—	—	—
SM-E700M	CPA Panama	E700MUWA1BRH4	E700MUBU1BPC1	2018-12-11	2018-12-11	1.369 GiB	SM-E700M_1_20181211095719_d3nm0ys0vk_fac.zip
SM-E700M	SAM Peru	E700MTFG1BRH4	E700MUBU1BPC1	2018-12-11	2018-12-11	1.343 GiB	SM-E700M_1_20181211100053_duskc11305_fac.zip
SM-E700M	SAM Peru	E700MTFG1BRH4	E700MUBS1BRI2	2018-09-25	—	—	—
SM-E700M	TTT Trinidad & Tobago	E700MUUB1BRH4	E700MUBU1BPC1	2018-12-11	2018-12-11	1.269 GiB	SM-E700M_1_20181211103153_e5m5n92k1c_fac.zip

Device specifications

Display diagonal14 cm (5.5")
Display resolution1280 x 720 pixels
Display typeSAMOLED
RAM2 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
Battery capacity2950 mAh
Weight141 g

Specifications of SM-E700H, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash E700MUBS1BRI2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

E700MUBS1BRI2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

E700MUBS1BRI2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy E7, released for 4 countries, 4 CSC codes. Samsung built it on 2018-09-25.

No. A newer build for SM-E700M is available: E700MUBS1BRJ1. Install it instead of E700MUBS1BRI2 unless you need this exact version. The previous build was E700MUBS1BQA1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy E7 must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy E7 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 17 other builds of this model use the same binary, so you can switch between them in both directions.