Samsung Galaxy Z Flip F700FXXSAIWA8
SM-F700F 2 countries Android 13

Samsung Galaxy Z Flip F700FXXSAIWA8 Firmware

Samsung Galaxy Z Flip F700FXXSAIWA8 is an Android 13 firmware for Brazil (ZTO), Mexico (MXO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build F700FXXSAIWA7, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-F700F is available: F700FXXUEKZE3.

8.8/10 (471)8,300 times
Android 13
OS Version
2023-01-21
Build Date
2023-01-01
Security patch
2
Countries
2
CSC codes
A (10)
Bootloader binary

Bootloader binary A (10). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Z Flip use bootloader binary E (14) (latest: F700FXXUEKZE3). If your device already runs binary E (14), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: F700FXXUAIVK3
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-F700F
    MXO Mexico
    		F700FOXMAIVL2 2023-01-21 2023-01-21 6.07 GiB
    SM-F700F_4_20230113034040_n3f6oxo6p0_fac.zip
    SM-F700F
    ZTO Brazil
    		F700FOWOAIVL2 2023-01-21 2023-01-21 5.473 GiB
    SM-F700F_4_20230117235900_y6owoglx64_fac.zip

    No matching downloads

    Device specifications

    • Launched withAndroid 10.0
    • Display diagonal17 cm (6.7")
    • Display resolution2636 x 1080 pixels
    • Display typeDynamic AMOLED
    • Processor frequency2.95 GHz
    • Processor familyQualcomm Snapdragon
    • Processor model855+
    • RAM8 GB
    • Rear camera resolution12 MP
    • Rear camera typeDual camera
    • SIM cardsDual SIM
    • Battery capacity3300 mAh
    • Weight183 g

    What's new in F700FXXSAIWA8

    • The security of your device has been improved.

    How to flash F700FXXSAIWA8

    • F700FXXSAIWA8 has bootloader binary A (10). Your device must run binary A (10) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    F700FXXSAIWA8 is Android 13 firmware for Samsung Galaxy Z Flip, released for Brazil (ZTO), Mexico (MXO). It includes the 2023-01-01 security patch. Samsung built it on 2023-01-21.

    No. A newer build for SM-F700F is available: F700FXXUEKZE3. Install it instead of F700FXXSAIWA8 unless you need this exact version. The previous build was F700FXXSAIWA7.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Z Flip must be on bootloader binary A (10) or lower.

    This build uses bootloader binary A (10). It can be flashed on a Samsung Galaxy Z Flip running binary A (10) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 28 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Z Flip

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.
    · Security patch update
    Show 15 older builds

    • Security
    The device is protected with improved security.

    No changelog details available.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    No changelog details available.
    One UI 5.1.1 Update
    Multitasking

    Better app previews on the Recents screen
    The Recents screen now shows apps as they will appear after you open them. You can easily see if an app is opened in split screen, full screen, or as a pop-up.

    Easily switch from pop-up view to split screen
    Press and hold the handle at the top of the pop-up window, then drag the app to the side of the screen where you want it to be shown.

    Restore pop-ups snapped to the edge of the screen
    Drag an app in pop-up view t...

    One UI 5.1.1 Update
    Multitasking

    Better app previews on the Recents screen
    The Recents screen now shows apps as they will appear after you open them. You can easily see if an app is opened in split screen, full screen, or as a pop-up.

    Easily switch from pop-up view to split screen
    Press and hold the handle at the top of the pop-up window, then drag the app to the side of the screen where you want it to be shown.

    Restore pop-ups snapped to the edge of the screen
    Drag an app in pop-up view t...

    No changelog details available.
    One UI 5.1.1 Update
    Multitasking

    Better app previews on the Recents screen
    The Recents screen now shows apps as they will appear after you open them. You can easily see if an app is opened in split screen, full screen, or as a pop-up.

    Easily switch from pop-up view to split screen
    Press and hold the handle at the top of the pop-up window, then drag the app to the side of the screen where you want it to be shown.

    Restore pop-ups snapped to the edge of the screen
    Drag an app in pop-up view t...

    No changelog details available.

    • Overall stability of functions improved.
    • The security of your device has been improved.

    • Overall stability of functions improved.
    • The security of your device has been improved.

    No changelog details available.

    • The Camera and Gallery functions have been improved.
    • Security
    The device is protected with improved security.

    • The Camera and Gallery functions have been improved.
    • Security
    The device is protected with improved security.

    Model firmware by region