Samsung Galaxy Z Flip F700FXXU1ATAF
SM-F700F 36 countries Android 10

Samsung Galaxy Z Flip F700FXXU1ATAF Firmware

Samsung Galaxy Z Flip F700FXXU1ATAF is an Android 10 firmware for 36 countries, 36 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-F700F is available: F700FXXUEKZE3.

8.7/10 (454)156,405 times
Android 10
OS Version
2020-01-14
Build Date
n/a
Security patch
36
Countries
36
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Z Flip use bootloader binary E (14) (latest: F700FXXUEKZE3). If your device already runs binary E (14), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    4
    MODEM/CP Version: F700FXXU1ATAF
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-F700F
    ATO Austria
    AUT Switzerland
    BGL Bulgaria
    BTU United Kingdom
    +28 more countries
    CAM Cambodia
    DBT Germany
    EUR Greece
    ILO Israel
    LUX Luxembourg
    MYM Myanmar (Burma)
    NEE Nordic Europe
    ORX Slovakia
    PHE Spain
    PHN Netherlands
    ROM Romania
    SEB Baltic Europe
    SEE Serbia
    SER Russia
    SIO Slovenia
    SKZ Kazakhstan
    THL Thailand
    TPH Portugal
    TUR Turkey
    XEF France
    XEH Hungary
    XEO Poland
    XEV Vietnam
    XEZ Czechia
    XFA South Africa
    XME Malaysia
    XSG United Arab Emirates
    XTC Philippines
    		F700FOXM1ATAF 2020-02-12 5.864 GiB
    SM-F700F_1_20211123143100_xe64h7rg9a_fac.zip
    MD5:68e896ebb2ec3a47040ce162b23c3f4a
    SHA1:0e76ae9b14b7f0d54ccd143c607ca78cd51109b6
    SM-F700F
    MXO Mexico
    TPA Panama
    		F700FOXM1ATAF 2020-02-12 5.864 GiB
    SM-F700F_1_20211211055401_a55n1092f2_fac.zip
    SM-F700F
    XID Indonesia
    		F700FOLE1ATAF 2020-02-12 5.312 GiB
    SM-F700F_1_20211129190331_cwoi1rzyhg_fac.zip
    SM-F700F
    ZTO Brazil
    		F700FOWO1ATAP 2020-02-12 5.284 GiB
    SM-F700F_1_20211211055901_ko622hyg8m_fac.zip

    No matching downloads

    How to flash F700FXXU1ATAF

    • F700FXXU1ATAF has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of F700FXXU1ATAF by region

    Samsung released this build in all regions (36) on the same day, February 12, 2020.

    Device specifications

    • Launched withAndroid 10.0
    • Display diagonal17 cm (6.7")
    • Display resolution2636 x 1080 pixels
    • Display typeDynamic AMOLED
    • Processor frequency2.95 GHz
    • Processor familyQualcomm Snapdragon
    • Processor model855+
    • RAM8 GB
    • Rear camera resolution12 MP
    • Rear camera typeDual camera
    • SIM cardsDual SIM
    • Battery capacity3300 mAh
    • Weight183 g

    Frequently Asked Questions

    F700FXXU1ATAF is Android 10 firmware for Samsung Galaxy Z Flip, released for 36 countries, 36 CSC codes. Samsung built it on 2020-01-14.

    No. A newer build for SM-F700F is available: F700FXXUEKZE3. Install it instead of F700FXXU1ATAF unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Z Flip must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Z Flip running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 19 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Z Flip

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.
    · Security patch update
    Show 15 older builds

    • Security
    The device is protected with improved security.

    No changelog details available.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    No changelog details available.
    One UI 5.1.1 Update
    Multitasking

    Better app previews on the Recents screen
    The Recents screen now shows apps as they will appear after you open them. You can easily see if an app is opened in split screen, full screen, or as a pop-up.

    Easily switch from pop-up view to split screen
    Press and hold the handle at the top of the pop-up window, then drag the app to the side of the screen where you want it to be shown.

    Restore pop-ups snapped to the edge of the screen
    Drag an app in pop-up view t...

    No changelog details available.
    One UI 5.1.1 Update
    Multitasking

    Better app previews on the Recents screen
    The Recents screen now shows apps as they will appear after you open them. You can easily see if an app is opened in split screen, full screen, or as a pop-up.

    Easily switch from pop-up view to split screen
    Press and hold the handle at the top of the pop-up window, then drag the app to the side of the screen where you want it to be shown.

    Restore pop-ups snapped to the edge of the screen
    Drag an app in pop-up view t...

    No changelog details available.

    • Overall stability of functions improved.
    • The security of your device has been improved.

    No changelog details available.

    • The Camera and Gallery functions have been improved.
    • Security
    The device is protected with improved security.

    Model firmware by region