SM-F907N 1 country Android 9 (Pie)

Samsung Galaxy Fold 5G F907NKOU2ASK4 Firmware

Name: Samsung Galaxy Fold 5G (SM-F907N)
Brand: Samsung
Availability: InStock

Samsung Galaxy Fold 5G F907NKOU2ASK4 is an Android 9 (Pie) firmware for South Korea (KOO, KTC, LUC, SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build F907NKOU1ASJ5 https://samfirm.shop/build/F907NKOU1ASJ5: bootloader binary raised from 1 to 2, so after installing it there is no way back to older builds. A newer build for SM-F907N is available: F907NKOU3IXJ1 https://samfirm.shop/build/F907NKOU3IXJ1.

9.2/10 (453)17,636 times

Android 9 (Pie)

OS Version

2019-11-11

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Fold 5G use bootloader binary 3 (latest: F907NKOU3IXJ1). If your device already runs binary 3, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: F907NKOU2ASK4

Model	Region	CSC Version	Release date	Size	File name
SM-F907N	KOO South Korea	F907NOKR2ASK4	2019-11-18	5.641 GiB	SM-F907N_1_20201030153103_t7sof7kwwq_fac.zip
SM-F907N	KTC South Korea	F907NOKR2ASK4	2019-11-18	5.641 GiB	SM-F907N_1_20201030151434_sny1tgv8q5_fac.zip
SM-F907N	LUC South Korea	F907NOKR2ASK4	2019-11-18	5.641 GiB	SM-F907N_1_20201030152705_trrfa1aod5_fac.zip
SM-F907N	SKC South Korea	F907NOKR2ASK4	2019-11-18	5.641 GiB	SM-F907N_1_20201030151405_14rk73w0og_fac.zip

Device specifications

Display diagonal18.5 cm (7.3")
Display resolution2152 x 1536 pixels
Display typeDynamic AMOLED
RAM12 GB
Rear camera resolution12 MP
Rear camera typeTriple camera
Battery capacity4235 mAh
Weight276 g

Specifications of SM-F907, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash F907NKOU2ASK4

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

F907NKOU2ASK4 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

F907NKOU2ASK4 is Android 9 (Pie) firmware for Samsung Galaxy Fold 5G, released for South Korea (KOO, KTC, LUC, SKC). Samsung built it on 2019-11-11.

No. A newer build for SM-F907N is available: F907NKOU3IXJ1. Install it instead of F907NKOU2ASK4 unless you need this exact version. The previous build was F907NKOU1ASJ5.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 5.641 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Fold 5G must be on bootloader binary 2 or lower.

This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Fold 5G running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.