SM-G130M 1 country Android 4.4.2 (KitKat)

Samsung Galaxy Young2 G130MUBS0AQA3 Firmware

Name: Samsung Galaxy Young2 (SM-G130M)
Brand: Samsung
Availability: InStock

Samsung Galaxy Young2 G130MUBS0AQA3 is an Android 4.4.2 (KitKat) firmware for Mexico (TMM). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G130MUBS0AQA2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G130M is available: G130MUBS0AQB1.

8.8/10 (451)8,816 times

Android 4.4.2 (KitKat)

OS Version

2017-01-09

First release

other regions until 2017-02-03

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
SM-G130M	TMM Mexico	G130MTMM0AOD1	G130MUBU0AOC1	2017-02-03	2017-02-03	501.693 MiB	SM-G130M_1_20170203151253_soagkq4269_fac.zip
SM-G130M	TMM Mexico	G130M0AOD1	G130MUBS0AQA3	2017-01-09	—	—	—

Device specifications

Display diagonal8.89 cm (3.5")
Display resolution320 x 480 pixels
Display typeTFT
RAM0.5 GB
Rear camera resolution3 MP
Rear camera typeSingle camera
Battery capacity1300 mAh
Weight108 g

Specifications of SM-G130, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash G130MUBS0AQA3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G130MUBS0AQA3 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G130MUBS0AQA3 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Young2, released for Mexico (TMM). Samsung built it on 2017-01-09.

No. A newer build for SM-G130M is available: G130MUBS0AQB1. Install it instead of G130MUBS0AQA3 unless you need this exact version. The previous build was G130MUBS0AQA2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 501.693 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Young2 must be on bootloader binary 0 or lower.

This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Young2 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 15 other builds of this model use the same binary, so you can switch between them in both directions.