Samsung Galaxy Ace4 Lite G313HXXU0AOF1
SM-G313H 2 countries Android 4.4.2 (KitKat)

Samsung Galaxy Ace4 Lite G313HXXU0AOF1 Firmware

Samsung Galaxy Ace4 Lite G313HXXU0AOF1 is an Android 4.4.2 (KitKat) firmware for Iran (THR), Saudi Arabia (ACR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G313HDOU0AOE2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G313H is available: G313HXXS0AQA4.

Download firmware
9.0/10 (460)8,778 times
Android 4.4.2 (KitKat)
OS Version
2015-06-17
Build Date
2
Countries
2
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: G313HXXU0AOF1
    ModelRegionCSC VersionSizeFile nameDownload
    SM-G313H
    ACR Saudi Arabia
    		G313HOJV0AOF1 — — Download
    SM-G313H
    THR Iran
    		G313HOJV0AOF1 — — Download

    No matching downloads

    How to flash G313HXXU0AOF1

    • G313HXXU0AOF1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 4.4.2
    • Display diagonal10.1 cm (3.97")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • Processor frequency1 GHz
    • Processor familyBroadcom
    • Processor modelBCM21663
    • RAM0.5 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity1500 mAh
    • Weight123.8 g

    Frequently Asked Questions

    G313HXXU0AOF1 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Ace4 Lite, released for Iran (THR), Saudi Arabia (ACR). Samsung built it on 2015-06-17.

    No. A newer build for SM-G313H is available: G313HXXS0AQA4. Install it instead of G313HXXU0AOF1 unless you need this exact version. The previous build was G313HDOU0AOE2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Ace4 Lite must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Ace4 Lite running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 40 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Ace4 Lite

    No changelog details available.
    Model firmware by region