Samsung Galaxy Core Plus G3502LUBUANA6
SM-G3502L 3 countries

Samsung Galaxy Core Plus G3502LUBUANA6 Firmware

Samsung Galaxy Core Plus G3502LUBUANA6 is an Android firmware for Panama (TPA), Trinidad & Tobago (TTT), Uruguay (UPO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-G3502L is available: G3502LUBUANH2.

Download firmware
9.2/10 (478)13,012 times
2014-01-28
Build Date
3
Countries
3
CSC codes
U (30)
Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: G3502LUBUANA6
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-G3502L
    TPA Panama
    		G3502LUUBANA5 2014-01-28 2014-02-06 666.514 MiB
    SM-G3502L_TPA_1_20140428143300_vdmsqawul7_fac.zip
    		Download
    SM-G3502L
    TTT Trinidad & Tobago
    		G3502LUUBANA5 2014-01-28 2014-02-12 666.514 MiB
    SM-G3502L_1_20150902151326_hju6ii9gov_fac.zip
    		Download
    SM-G3502L
    UPO Uruguay
    		G3502LUUBANA5 — — — — Download

    No matching downloads

    How to flash G3502LUBUANA6

    • G3502LUBUANA6 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G3502LUBUANA6 by region

    First release
    February 6, 2014
    Last region
    February 12, 2014
    Duration
    7 days
    Regions
    2
    1. Day 1 · · 1 region
      PanamaTPA
    2. Day 7 · · 1 region
      Trinidad & TobagoTTT

    Device specifications

    • Launched withAndroid 4.2
    • Display diagonal10.9 cm (4.3")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • RAM0.75 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity1800 mAh
    • Weight132.5 g

    Specifications of SM-G350, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    No. A newer build for SM-G3502L is available: G3502LUBUANH2. Install it instead of G3502LUBUANA6 unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Core Plus must be on bootloader binary U (30) or lower.

    This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Core Plus running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Core Plus

    No changelog details available.
    Model firmware by region