Samsung Galaxy Ace Style G357FZXWU1AOC3
SM-G357FZ 4 countries Android 4.4.4 (KitKat)

Samsung Galaxy Ace Style G357FZXWU1AOC3 Firmware

Samsung Galaxy Ace Style G357FZXWU1AOC3 is an Android 4.4.4 (KitKat) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G357FZDXU1AOC1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G357FZ is available: G357FZXXU1AQJ1.

Download firmware
9.2/10 (460)17,486 times
Android 4.4.4 (KitKat)
OS Version
2015-03-30
Build Date
4
Countries
4
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-G357FZ
    CAC Uzbekistan
    		G357FZOXE1AOC2G357FZXXU1AOB1 — 548.987 MiB
    SM-G357FZ_1_20210216153335_l0065wmi5h_fac.zip
    		Download
    SM-G357FZ
    OMD Ukraine
    SER Russia
    		G357FZOXE1AOC2G357FZXXU1AOB1 2015-04-15 561.971 MiB
    SM-G357FZ_1_20210216153935_flowt0brz1_fac.zip
    		Download
    SM-G357FZ
    SKZ Kazakhstan
    		G357FZOXE1AOC2G357FZXWU1AOC3 — — — Download

    No matching downloads

    How to flash G357FZXWU1AOC3

    • G357FZXWU1AOC3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G357FZXWU1AOC3 by region

    First release
    April 15, 2015
    Last region
    April 20, 2015
    Duration
    6 days
    Regions
    2
    1. Day 1 · · 1 region
      RussiaSER
    2. Day 6 · · 1 region
      UkraineOMD

    Device specifications

    • Launched withAndroid 4.4
    • Display diagonal10.9 cm (4.3")
    • Display resolution480 x 800 pixels
    • Display typeSAMOLED
    • Processor frequency1.2 GHz
    • RAM1 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity1900 mAh
    • Weight126 g

    Frequently Asked Questions

    G357FZXWU1AOC3 is Android 4.4.4 (KitKat) firmware for Samsung Galaxy Ace Style, released for 4 countries, 4 CSC codes. Samsung built it on 2015-03-30.

    No. A newer build for SM-G357FZ is available: G357FZXXU1AQJ1. Install it instead of G357FZXWU1AOC3 unless you need this exact version. The previous build was G357FZDXU1AOC1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Ace Style must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Ace Style running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 36 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Ace Style

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 6 older builds
    No changelog details available.
    Model firmware by region