Samsung Galaxy Ace G357MUBU0AOG2
SM-G357M 4 countries Android 4.4.2 (KitKat)

Samsung Galaxy Ace G357MUBU0AOG2 Firmware

Samsung Galaxy Ace G357MUBU0AOG2 is an Android 4.4.2 (KitKat) firmware for 4 countries, 9 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G357MUBU0AOF4, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-G357M.

9.0/10 (452)47,576 times
Android 4.4.2 (KitKat)
OS Version
2015-07-09
First release
other regions until 2015-09-16
n/a
Security patch
4
Countries
9
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    10
    MODEM/CP Version: G357MUBU0AOG2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-G357M
    ARO Argentina
    COO Colombia
    G357MUUB0AOG1 2015-08-28 2015-08-10 637.064 MiB
    SM-G357M_1_20150831164727_ptamryz1b2_fac.zip
    SM-G357M
    COE Colombia
    G357MCOE0AOG1 — — — —
    SM-G357M
    COL Colombia
    G357MUWM0AOG1 2015-08-12 2015-08-12 711.269 MiB
    SM-G357M_1_20150831164853_ms8g29725f_fac.zip
    SM-G357M
    CTI Argentina
    G357MUWA0AOG1 2015-09-16 2015-09-16 733.294 MiB
    SM-G357M_1_20150916111840_2k7s0nq6ws_fac.zip
    SM-G357M
    ICE Costa Rica
    G357MICE0AOG2 2015-08-29 2015-08-29 643.454 MiB
    SM-G357M_1_20150831125226_la5ugx5z0n_fac.zip
    SM-G357M
    ICE Costa Rica
    G357M0AOG2 2015-07-09 — — —
    SM-G357M
    PSN Argentina
    G357MPSN0AOG1 2015-09-14 2015-09-14 675.44 MiB
    SM-G357M_1_20150914163427_87ffl9r5r0_fac.zip
    SM-G357M
    PSN Argentina
    G357M0AOG1 2015-07-09 — — —
    SM-G357M
    TCE Mexico
    G357MTCE0AOG1 — — — —
    SM-G357M
    UFN Argentina
    G357MTFG0AOG1 2015-09-14 2015-09-14 680.907 MiB
    SM-G357M_1_20150914163840_lwyctje1er_fac.zip

    No matching downloads

    Device specifications

    • Display diagonal10.9 cm (4.3")
    • Display resolution480 x 800 pixels
    • Display typeSAMOLED
    • Processor frequency1.2 GHz
    • RAM1 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity1900 mAh
    • Weight126 g

    How to flash G357MUBU0AOG2

    • G357MUBU0AOG2 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    G357MUBU0AOG2 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Ace, released for 4 countries, 9 CSC codes. Samsung built it on 2015-07-09.

    Yes. G357MUBU0AOG2 is the newest build for SM-G357M on SamFirm. The previous build was G357MUBU0AOF4.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Ace must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Ace running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 15 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Ace

    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    Show 11 older builds
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.