Samsung Galaxy Core Prime G360FXXS1BPI3
SM-G360F 8 countries Android 5.0.2 (Lollipop)

Samsung Galaxy Core Prime G360FXXS1BPI3 Firmware

Samsung Galaxy Core Prime G360FXXS1BPI3 is an Android 5.0.2 (Lollipop) firmware for 8 countries, 10 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G360FXXU1BPI1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G360F is available: G360FXXS1BRL3.

Download firmware
9.1/10 (450)48,212 times
Android 5.0.2 (Lollipop)
OS Version
2016-09-19
Build Date
n/a
Security patch
8
Countries
10
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    11
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-G360F
    3IE Ireland
    		G360F1BPE1G360FXXS1BPI3 — — —
    SM-G360F
    3IE Ireland
    		G360F3IE1BPE1G360FXXU1BOL1 2016-11-04 784.753 MiB
    SM-G360F_1_20170529155939_5yho9pdwk3_fac.zip
    SM-G360F
    ATO Austria
    		G360F1BPE1G360FXXS1BPI3 — — —
    SM-G360F
    ITV Italy
    		G360F1BPG1G360FXXS1BPI3 — — —
    SM-G360F
    NEE Nordic Europe
    		G360F1BPE1G360FXXS1BPI3 — — —
    SM-G360F
    O2C Czechia
    		G360F1BPF1G360FXXS1BPI3 — — —
    SM-G360F
    PHE Spain
    		G360F1BPE1G360FXXS1BPI3 — — —
    SM-G360F
    SEE Serbia
    		G360FOXX1BPE1G360FXXS1BPI3 — — —
    SM-G360F
    TIM Italy
    		G360F1BPG1G360FXXS1BPI3 — — —
    SM-G360F
    VGF
    		G360F1BPE1G360FXXS1BPI3 — — —
    SM-G360F
    WIN Italy
    		G360F1BPG1G360FXXS1BPI3 — — —

    No matching downloads

    How to flash G360FXXS1BPI3

    • G360FXXS1BPI3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G360FXXS1BPI3 by region

    Samsung released this build in all regions (1) on the same day, November 4, 2016.

    Device specifications

    • Display diagonal11.4 cm (4.5")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • Processor frequency1.2 GHz
    • RAM2 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2000 mAh
    • Weight130 g

    Frequently Asked Questions

    G360FXXS1BPI3 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy Core Prime, released for 8 countries, 10 CSC codes. Samsung built it on 2016-09-19.

    No. A newer build for SM-G360F is available: G360FXXS1BRL3. Install it instead of G360FXXS1BPI3 unless you need this exact version. The previous build was G360FXXU1BPI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 784.753 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Core Prime must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Core Prime running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 36 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Core Prime

    No changelog details available.

    · The security of your device has been improved.

    No changelog details available.
    Model firmware by region