Samsung Galaxy Core Prime G360VVRU3CQC1
SM-G360V 1 country Android 5.1.1 (Lollipop)

Samsung Galaxy Core Prime G360VVRU3CQC1 Firmware

Samsung Galaxy Core Prime G360VVRU3CQC1 is an Android 5.1.1 (Lollipop) firmware for United States (VZW). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SM-G360V is available: G360VVRU3CRA2.

Download firmware
8.8/10 (24)173 times
Android 5.1.1 (Lollipop)
OS Version
2017-03-10
Build Date
1
Countries
1
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: G360VVRU3CQC1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G360V
    VZW United States
    		G360VVZW3CQC1 2017-04-05 1.099 GiB
    SM-G360V_1_20170310101239_3gnxilfag4_fac.zip
    		Download

    No matching downloads

    How to flash G360VVRU3CQC1

    • G360VVRU3CQC1 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal11.4 cm (4.5")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • RAM2 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity2000 mAh
    • Weight130 g

    Specifications of SM-G360F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    G360VVRU3CQC1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Core Prime, released for United States (VZW). Samsung built it on 2017-03-10.

    No. A newer build for SM-G360V is available: G360VVRU3CRA2. Install it instead of G360VVRU3CQC1 unless you need this exact version.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.099 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Core Prime must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Core Prime running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Core Prime

    No changelog details available.
    Model firmware by region