Samsung Galaxy Core LTE G386FXWUANK1
SM-G386F 2 countries Android 4.2.2 (Jelly)

Samsung Galaxy Core LTE G386FXWUANK1 Firmware

Samsung Galaxy Core LTE G386FXWUANK1 is an Android 4.2.2 (Jelly) firmware for France (XEF), Romania (ROM). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G386FXXUANK1: Android updated from Jelly(Android Bean) to Android 4.2.2 (Jelly). A newer build for SM-G386F is available: G386FXWUAOL1.

Download firmware
9.2/10 (460)13,021 times
Android 4.2.2 (Jelly)
OS Version
2014-11-10
Build Date
2
Countries
2
CSC codes
U (30)
Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionSizeFile nameDownload
    SM-G386F
    ROM Romania
    		G386FANK1G386FXWUANK1 — — Download
    SM-G386F
    ROM Romania
    		G386FROMANK1G386FXXUANJ1 826.423 MiB
    SM-G386F_ROM_1_20150217100920_h7bu45end1_fac.zip
    		Download
    SM-G386F
    XEF France
    		G386FANK1G386FXWUANK1 — — Download

    No matching downloads

    How to flash G386FXWUANK1

    • G386FXWUANK1 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Display diagonal11.4 cm (4.5")
    • Display resolution540 x 960 pixels
    • Display typeTFT
    • Processor frequency1.2 GHz
    • RAM1 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2100 mAh
    • Weight137 g

    Frequently Asked Questions

    G386FXWUANK1 is Android 4.2.2 (Jelly) firmware for Samsung Galaxy Core LTE, released for France (XEF), Romania (ROM). Samsung built it on 2014-11-10.

    No. A newer build for SM-G386F is available: G386FXWUAOL1. Install it instead of G386FXWUANK1 unless you need this exact version. The previous build was G386FXXUANK1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 826.423 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Core LTE must be on bootloader binary U (30) or lower.

    This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Core LTE running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 26 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Core LTE

    No changelog details available.
    Model firmware by region