Samsung Galaxy Grand Prime G531HUBU0APE2 Firmware
Samsung Galaxy Grand Prime G531HUBU0APE2 is an Android 5.1.1 (Lollipop) firmware for 7 countries, 10 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G531HVJU0APE2 https://samfirm.shop/build/G531HVJU0APE2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G531H is available: G531HUBS0ARJ3 https://samfirm.shop/build/G531HUBS0ARJ3.
Android 5.1.1 (Lollipop)
OS Version
2016-05-31
First release
other regions until 2016-07-14
7
Countries
10
CSC codes
0
Bootloader binary
Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
13
| Model | Region | CSC Version | MODEM/CP Version | Build Date | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|---|
| SM-G531H |
CHE Chile | G531H0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
| SM-G531H |
CHE Chile | G531HCHE0APE2 | G531HUBU0APF2 | 2016-05-31 | 2016-07-18 | 745.275 MiB | SM-G531H_1_20190208112240_3lc9gff5jg_fac.zip | Download |
| SM-G531H |
CHL Chile | G531HUWA0APE2 | G531HUBU0APF2 | 2016-07-06 | 2016-07-06 | 800.023 MiB | SM-G531H_1_20160705201941_6bfz91fh4j_fac.zip | Download |
| SM-G531H |
CHL Chile | G531HUWA0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
| SM-G531H |
CHO Chile | G531HUUB0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
| SM-G531H |
CHT Chile | G531HTFG0APE2 | G531HUBU0APF2 | 2016-07-14 | 2016-07-14 | 782.471 MiB | SM-G531H_1_20160714131954_4lqybio6r6_fac.zip | Download |
| SM-G531H |
CHT Chile | G531HTFG0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
| SM-G531H |
COO Colombia | G531HUUB0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
| SM-G531H |
JDI Jamaica | G531H0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
| SM-G531H |
TCE Mexico | G531H0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
| SM-G531H |
TPA Panama | G531HUUB0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
| SM-G531H |
TTT Trinidad & Tobago | G531HUUB0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
| SM-G531H |
UPO Uruguay | G531HUUB0APE2 | G531HUBU0APE2 | 2016-05-31 | — | — | — | Download |
No matching downloads
How to flash G531HUBU0APE2
- G531HUBU0APE2 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Rollout of G531HUBU0APE2 by region
- First release
- July 6, 2016
- Last region
- July 18, 2016
- Duration
- 13 days
- Regions
- 3
- Day 1 · · 1 regionChileCHL
- Day 9 · · 1 regionChileCHT
- Day 13 · · 1 regionChileCHE
Device specifications
- Display diagonal12.7 cm (5")
- Display resolution540 x 960 pixels
- Display typeTFT
- Processor frequency1.2 GHz
- RAM1 GB
- Rear camera resolution8 MP
- Rear camera typeSingle camera
- SIM cardsSingle SIM
- Battery capacity2600 mAh
- Weight156 g
Frequently Asked Questions
G531HUBU0APE2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Grand Prime, released for 7 countries, 10 CSC codes. Samsung built it on 2016-05-31.
No. A newer build for SM-G531H is available: G531HUBS0ARJ3. Install it instead of G531HUBU0APE2 unless you need this exact version. The previous build was G531HVJU0APE2.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Grand Prime must be on bootloader binary 0 or lower.
This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Grand Prime running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 81 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy Grand Prime
No changelog details available.
- G531HUBS0ARJ3Oct 8, 2018
- G531HUBS0ARJ2Oct 1, 2018
- G531HUPS0ARJ1Oct 1, 2018
- G531HUBS0ARI2Sep 13, 2018
- G531HVJS0ARI1Sep 13, 2018
- G531HXXS0ARH2Aug 28, 2018
- G531HUBU0AQI1Sep 12, 2017
- G531HVJU0AQI1Sep 12, 2017
- G531HXXU0AQG2Jul 6, 2017
- G531HXXS0AQF1Jun 14, 2017
- G531HDDS0AQE1May 8, 2017
- G531HDXS0AQE1May 8, 2017
- G531HDXS0AQC1Feb 28, 2017
- G531HXXU0AQC1Mar 7, 2017
- G531HDDS0AQB1Feb 13, 2017
- G531HVJS0AQA3Jan 19, 2017
- G531HDXU0AQA2Jan 22, 2017
- G531HUBS0AQA2Jan 17, 2017
- G531HUPS0AQA2Jan 19, 2017
- G531HXXU0AQA2Jan 19, 2017