Samsung Galaxy J2 Prime G532GDXS1ARF3
SM-G532G 8 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy J2 Prime G532GDXS1ARF3 Firmware

Samsung Galaxy J2 Prime G532GDXS1ARF3 is an Android 6.0.1 (Marshmallow) firmware for 8 countries, 10 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G532GDDU1ARD1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G532G is available: G532GDXU1ASA5.

Download firmware
9.1/10 (479)43,464 times
Android 6.0.1 (Marshmallow)
OS Version
2018-06-07
Build Date
8
Countries
10
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    3
    MODEM/CP Version: G532GDXU1AQA3
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G532G
    CAM Cambodia
    LAO Laos
    MYM Myanmar (Burma)
    THL Thailand
    +2 more countries
    XME Malaysia
    XXV Vietnam
    		G532GOLB1AQI2 2018-06-15 1.407 GiB
    SM-G532G_1_20190215103014_z4biwsk5i4_fac.zip
    		Download
    SM-G532G
    GLB, SMA, XTC Philippines
    		G532GOLD1AQI2 2018-06-15 1.44 GiB
    SM-G532G_1_20190215102327_qqbmonfo3m_fac.zip
    		Download
    SM-G532G
    XID Indonesia
    		G532GOLE1AQI2 2018-06-15 1.399 GiB
    SM-G532G_1_20190215114853_5l24jlp6n1_fac.zip
    		Download

    No matching downloads

    How to flash G532GDXS1ARF3

    • G532GDXS1ARF3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G532GDXS1ARF3 by region

    Samsung released this build in all regions (10) on the same day, June 15, 2018.

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution540 x 960 pixels
    • Display typePLS
    • RAM1.5 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity2600 mAh
    • Weight160 g

    Specifications of SM-G532F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    G532GDXS1ARF3 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy J2 Prime, released for 8 countries, 10 CSC codes. Samsung built it on 2018-06-07.

    No. A newer build for SM-G532G is available: G532GDXU1ASA5. Install it instead of G532GDXS1ARF3 unless you need this exact version. The previous build was G532GDDU1ARD1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J2 Prime must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy J2 Prime running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 20 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J2 Prime

    · The stability of Lock screen/Secure Folder has been improved.
    · The stability of Email/Settings/Mobile networks has been improved.
    · Battery life has been optimized.
    · The security of your device has been improved.

    No changelog details available.

    - Other bug fixes
    ㆍThe Stability of GPS has been improved.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - Added new feature
    ㆍAdded the Move to SD card function. (Multimedia files can be saved to the SD card.)
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    No changelog details available.
    Show 9 older builds

    - Other bug fixes
    ㆍWhen using mobile hotspot and tethering, the problem that some device are not connected is solved.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    No changelog details available.

    - Other bug fixes
    ㆍAn occasional "touch long press" recognition issue has been resolved.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    Model firmware by region