Samsung Galaxy J2 Prime G532MUMS1ARH1
SM-G532M 4 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy J2 Prime G532MUMS1ARH1 Firmware

Samsung Galaxy J2 Prime G532MUMS1ARH1 is an Android 6.0.1 (Marshmallow) firmware for 4 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G532MUMU1ARH1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G532M is available: G532MUMU1ASK1.

Download firmware
8.7/10 (32)22,395 times
Android 6.0.1 (Marshmallow)
OS Version
2018-08-22
First release
other regions until 2018-10-24
4
Countries
5
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-G532M
    COO Colombia
    DOO Dominican Republic
    UYO Uruguay
    		G532MUUB1AQL3G532MUBU1AQL3 2018-10-24 2018-11-02 1.49 GiB
    SM-G532M_1_20190309103714_dgq0cczgci_fac.zip
    MD5:f9cb15203f5d573e4026ad65d947ec10
    SHA1:1bc4ca9489c4d33f4504cbfe07e4749f65106aee
    		Download
    SM-G532M
    EON Trinidad & Tobago
    UPO Uruguay
    		G532MUUB1AQL3G532MUBU1AQL3 2018-10-24 2018-11-07 1.493 GiB
    SM-G532M_1_20181024090801_7y5qkb3x76_fac.zip
    		Download
    SM-G532M
    EON Trinidad & Tobago
    		G532MUUB1AQL3G532MUMS1ARH1 2018-08-22 — — — Download
    SM-G532M
    UPO Uruguay
    		G532MUUB1AQL3G532MUMS1ARH1 2018-08-22 — — — Download

    No matching downloads

    How to flash G532MUMS1ARH1

    • G532MUMS1ARH1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G532MUMS1ARH1 by region

    First release
    November 2, 2018
    Last region
    November 14, 2018
    Duration
    13 days
    Regions
    5
    1. Day 1 · · 1 region
      ColombiaCOO
    2. Day 6 · · 2 regions
      Dominican RepublicDOOTrinidad & TobagoEON
    3. Day 13 · · 2 regions
      UruguayUPOUYO

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal12.7 cm (5")
    • Display resolution960 x 540 pixels
    • Display typePLS
    • Processor frequency1.4 GHz
    • Processor familyMediaTek
    • Processor modelMT6737T
    • RAM1.5 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2600 mAh
    • Weight160 g

    Frequently Asked Questions

    G532MUMS1ARH1 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy J2 Prime, released for 4 countries, 5 CSC codes. Samsung built it on 2018-08-22.

    No. A newer build for SM-G532M is available: G532MUMU1ASK1. Install it instead of G532MUMS1ARH1 unless you need this exact version. The previous build was G532MUMU1ARH1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J2 Prime must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy J2 Prime running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 83 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J2 Prime

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Show 11 older builds

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region