Samsung Galaxy On7 Prime G611LKLU2CTA1 Firmware
Samsung Galaxy On7 Prime G611LKLU2CTA1 is an Android 9 (Pie) firmware for South Korea (LUC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G611LKLU1CSE3 https://samfirm.shop/build/G611LKLU1CSE3: bootloader binary raised from 1 to 2, so after installing it there is no way back to older builds. A newer build for SM-G611L is available: G611LKLU3CUD2 https://samfirm.shop/build/G611LKLU3CUD2.
Android 9 (Pie)
OS Version
2020-01-16
First release
other regions until 2020-02-18
1
Countries
1
CSC codes
2
Bootloader binary
Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
Newer builds of Samsung Galaxy On7 Prime use bootloader binary 3 (latest: G611LKLU3CUD2 https://samfirm.shop/build/G611LKLU3CUD2). If your device already runs binary 3, this build cannot be flashed.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
MODEM/CP Version: G611LKLU2CTA1
| Model | Region | CSC Version | Build Date | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|
| SM-G611L |
LUC South Korea | G611LLUC2CTA1 | 2020-02-18 | 2020-02-18 | 2.579 GiB | SM-G611L_1_20200123135228_ziscbt4nok_fac.zip | Download |
| SM-G611L |
LUC South Korea | G611L2CTA1 | 2020-01-16 | — | — | — | Download |
No matching downloads
How to flash G611LKLU2CTA1
- G611LKLU2CTA1 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Frequently Asked Questions
G611LKLU2CTA1 is Android 9 (Pie) firmware for Samsung Galaxy On7 Prime, released for South Korea (LUC). Samsung built it on 2020-01-16.
No. A newer build for SM-G611L is available: G611LKLU3CUD2. Install it instead of G611LKLU2CTA1 unless you need this exact version. The previous build was G611LKLU1CSE3.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.579 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy On7 Prime must be on bootloader binary 2 or lower.
This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy On7 Prime running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy On7 Prime
No changelog details available.
- G611LKLU3CUD2May 24, 2021
- G611LKLS2CTJ1Nov 19, 2020
- G611LKLU2CTA1Jan 16, 2020
- G611LKLU1CSE3May 21, 2019
- G611LKLU1BRK6Nov 19, 2018
- G611LKLU1ARD3May 2, 2018