Samsung Galaxy S6 G920FXXU5EQAC
SM-G920F 6 countries Android 7.0 (Marshmallow)

Samsung Galaxy S6 G920FXXU5EQAC Firmware

Samsung Galaxy S6 G920FXXU5EQAC is an Android 7.0 (Marshmallow) firmware for 6 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G920FXXS5DRA3: Android updated from Android 6.0.1 (Marshmallow) to Android 7.0 (Marshmallow). A newer build for SM-G920F is available: G920FXXU6EVI1.

Download firmware
8.8/10 (456)30,144 times
Android 7.0 (Marshmallow)
OS Version
2017-02-01
Build Date
6
Countries
7
CSC codes
5
Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S6 use bootloader binary 6 (latest: G920FXXU6EVI1). If your device already runs binary 6, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: G920FXXU5EQAC
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G920F
    CAC Uzbekistan
    		G920FOXE5EQA4 — — —
    SM-G920F
    CAU Kazakhstan
    		G920FOXE5EQA4 — — —
    SM-G920F
    O2C Czechia
    		G920F5EQB1 — — —
    SM-G920F
    SEK Ukraine
    		G920FOXE5EQC2 — — —
    SM-G920F
    SER Russia
    		G920FOXE5EQA4 2017-03-10 2.405 GiB
    SM-G920F_1_20220920135550_5ts9gaqru7_fac.zip
    SM-G920F
    SKZ Kazakhstan
    		G920FOXE5EQA4 — — —
    SM-G920F
    XEF France
    		G920FOXA5EQAC 2017-03-10 2.41 GiB
    SM-G920F_1_20221005133311_lp9rrl4q3m_fac.zip
    MD5:a2421f8014eeb87992f1ef7f6032fe4b
    SHA1:19fa686b5b7166f0d8ba7823ecb8906879a28143

    No matching downloads

    How to flash G920FXXU5EQAC

    • G920FXXU5EQAC has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G920FXXU5EQAC by region

    Samsung released this build in all regions (2) on the same day, March 10, 2017.

    Device specifications

    • Launched withAndroid 5.0
    • Display diagonal12.9 cm (5.1")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.1 GHz
    • Processor familySamsung Exynos
    • Processor model7 Octa 7420
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2550 mAh
    • Weight138 g

    Frequently Asked Questions

    G920FXXU5EQAC is Android 7.0 (Marshmallow) firmware for Samsung Galaxy S6, released for 6 countries, 7 CSC codes. Samsung built it on 2017-02-01.

    No. A newer build for SM-G920F is available: G920FXXU6EVI1. Install it instead of G920FXXU5EQAC unless you need this exact version. The previous build was G920FXXS5DRA3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 must be on bootloader binary 5 or lower.

    This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy S6 running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 134 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6

    No changelog details available.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 12 older builds

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • The security of your device has been improved.

    Model firmware by region