Samsung Galaxy S6 G920FXXU5EQBG
SM-G920F 17 countries Android 7.0 (Nougat)

Samsung Galaxy S6 G920FXXU5EQBG Firmware

Samsung Galaxy S6 G920FXXU5EQBG is an Android 7.0 (Nougat) firmware for 17 countries, 17 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G920FXXU5EQBC, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G920F is available: G920FXXU6EVI1.

Download firmware
9.1/10 (459)78,772 times
Android 7.0 (Nougat)
OS Version
2017-02-25
Build Date
17
Countries
17
CSC codes
5
Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S6 use bootloader binary 6 (latest: G920FXXU6EVI1). If your device already runs binary 6, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    18
    MODEM/CP Version: G920FXXU5EQBG
    ModelRegionCSC VersionSizeFile nameDownload
    SM-G920F
    ATL Spain
    		G920FVFG5EQBG — — Download
    SM-G920F
    CNX Romania
    		G920FVFG5EQBG — — Download
    SM-G920F
    CYV Cyprus
    		G920FVFG5EQBG — — Download
    SM-G920F
    MOB Austria
    		G920FVFG5EQBG — — Download
    SM-G920F
    MTL Bulgaria
    		G920FVFG5EQBG — — Download
    SM-G920F
    OMN Italy
    		G920FVFG5EQBG — — Download
    SM-G920F
    SIM Slovenia
    		G920FVFG5EQBG — — Download
    SM-G920F
    SWC Switzerland
    		G920FVFG5EQBG — — Download
    SM-G920F
    SWC Switzerland
    		G920FVFG5EQC2 — — Download
    SM-G920F
    TCL Portugal
    		G920FVFG5EQBG — — Download
    SM-G920F
    VD2 Germany
    		G920FVFG5EQBG — — Download
    SM-G920F
    VDC Czechia
    		G920FVFG5EQBG — — Download
    SM-G920F
    VDF Netherlands
    		G920FVFG5EQBG — — Download
    SM-G920F
    VDH Hungary
    		G920FVFG5EQBG — — Download
    SM-G920F
    VDI Ireland
    		G920FVFG5EQBG — — Download
    SM-G920F
    VGR Greece
    		G920FVFG5EQBG — — Download
    SM-G920F
    VIP Croatia
    		G920FVFG5EQBG — — Download
    SM-G920F
    VOD United Kingdom
    		G920FVFG5EQBG — — Download

    No matching downloads

    How to flash G920FXXU5EQBG

    • G920FXXU5EQBG has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.0
    • Display diagonal12.9 cm (5.1")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.1 GHz
    • Processor familySamsung Exynos
    • Processor model7 Octa 7420
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2550 mAh
    • Weight138 g

    Frequently Asked Questions

    G920FXXU5EQBG is Android 7.0 (Nougat) firmware for Samsung Galaxy S6, released for 17 countries, 17 CSC codes. Samsung built it on 2017-02-25.

    No. A newer build for SM-G920F is available: G920FXXU6EVI1. Install it instead of G920FXXU5EQBG unless you need this exact version. The previous build was G920FXXU5EQBC.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 must be on bootloader binary 5 or lower.

    This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy S6 running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 134 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6

    No changelog details available.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 12 older builds

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • The security of your device has been improved.

    Model firmware by region