Samsung Galaxy S6 edge G925FXXS3DPDF
SM-G925F 11 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy S6 edge G925FXXS3DPDF Firmware

Samsung Galaxy S6 edge G925FXXS3DPDF is an Android 6.0.1 (Marshmallow) firmware for 11 countries, 17 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G925FXXU3DPDF: Android updated from Android 6.0.1 (Nougat) to Android 6.0.1 (Marshmallow). A newer build for SM-G925F is available: G925FXXU6EVI1.

9.0/10 (455)74,485 times
Android 6.0.1 (Marshmallow)
OS Version
2016-04-07
Build Date
n/a
Security patch
11
Countries
17
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S6 edge use bootloader binary 6 (latest: G925FXXU6EVI1). If your device already runs binary 6, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    17
    MODEM/CP Version: G925FXXS3DPDF
    ModelRegionCSC VersionSizeFile nameDownload
    SM-G925F
    COA Romania
    		G925F3DPBF — —
    SM-G925F
    COS Greece
    		G925F3DPBF — —
    SM-G925F
    CRO Croatia
    		G925FDHX3DPBF — —
    SM-G925F
    DDE Germany
    		G925FDDX3DPBF — —
    SM-G925F
    DHR Croatia
    		G925FDHX3DPBF — —
    SM-G925F
    DNL Netherlands
    		G925FDNX3DPBF — —
    SM-G925F
    DPL Poland
    		G925FDPX3DPBF — —
    SM-G925F
    DTM Germany
    		G925FDDX3DPBF — —
    SM-G925F
    MAX Austria
    		G925FDAX3DPBF — —
    SM-G925F
    MBM Macedonia
    		G925F3DPBF — —
    SM-G925F
    TMH Hungary
    		G925F3DPBF — —
    SM-G925F
    TMS Slovakia
    		G925F3DPBF — —
    SM-G925F
    TMZ Czechia
    		G925F3DPBF — —
    SM-G925F
    TNL Netherlands
    		G925FDNX3DPBF — —
    SM-G925F
    TPL Poland
    		G925FDPX3DPBF — —
    SM-G925F
    TRG Austria
    		G925FDAX3DPBF — —
    SM-G925F
    TTR Austria
    		G925FDAX3DPBF — —

    No matching downloads

    How to flash G925FXXS3DPDF

    • G925FXXS3DPDF has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.0
    • Display diagonal12.9 cm (5.1")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.1 GHz
    • Processor familySamsung Exynos
    • Processor model7 Octa 7420
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2600 mAh
    • Weight132 g

    Frequently Asked Questions

    G925FXXS3DPDF is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy S6 edge, released for 11 countries, 17 CSC codes. Samsung built it on 2016-04-07.

    No. A newer build for SM-G925F is available: G925FXXU6EVI1. Install it instead of G925FXXS3DPDF unless you need this exact version. The previous build was G925FXXU3DPDF.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 edge must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy S6 edge running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 99 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6 edge

    No changelog details available.

    • GPS
    The stability has been improved.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • GPS
    The stability has been improved.

    Show 8 older builds
    No changelog details available.

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    Model firmware by region