Samsung Galaxy S6 Edge G925IDVU4FVHP
SM-G925I 1 country Android 7.0 (Nougat)

Samsung Galaxy S6 Edge G925IDVU4FVHP Firmware

Samsung Galaxy S6 Edge G925IDVU4FVHP is an Android 7.0 (Nougat) firmware for Singapore (MM1, SIN, STH, XSP). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G925IDVU4FVHO: security patch 2018-04-01 instead of 2018-03-01. A newer build for SM-G925I is available: G925IDVU4FVHR.

Download firmware
9.0/10 (477)17,490 times
Android 7.0 (Nougat)
OS Version
2022-08-25
Build Date
2018-04-01
Security patch
1
Countries
4
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: G925IDVU4FRCA
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G925I
    MM1, SIN, STH, XSP Singapore
    		G925IOLC4FVHP 2022-08-25 2.427 GiB
    SM-G925I_1_20220825095510_6tlw29zqrx_fac.zip
    		Download

    No matching downloads

    How to flash G925IDVU4FVHP

    • G925IDVU4FVHP has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in G925IDVU4FVHP

    • GPS
    The stability has been improved.

    Rollout of G925IDVU4FVHP by region

    Samsung released this build in all regions (4) on the same day, August 25, 2022.

    Device specifications

    • Launched withAndroid 5.0
    • Display diagonal12.9 cm (5.1")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • Battery capacity2600 mAh
    • Weight132 g

    Specifications of SM-G925F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    G925IDVU4FVHP is Android 7.0 (Nougat) firmware for Samsung Galaxy S6 Edge, released for Singapore (MM1, SIN, STH, XSP). It includes the 2018-04-01 security patch. Samsung built it on 2022-08-25.

    No. A newer build for SM-G925I is available: G925IDVU4FVHR. Install it instead of G925IDVU4FVHP unless you need this exact version. The previous build was G925IDVU4FVHO.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.427 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S6 Edge must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy S6 Edge running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 65 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6 Edge

    • GPS
    The stability has been improved.

    • GPS
    The stability has been improved.
    • Security
    The device is protected with improved security.

    • GPS
    The stability has been improved.

    Model firmware by region