Samsung Galaxy S6 edge+ G9287ZHS2BPF3
SM-G9287 2 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy S6 edge+ G9287ZHS2BPF3 Firmware

Samsung Galaxy S6 edge+ G9287ZHS2BPF3 is an Android 6.0.1 (Marshmallow) firmware for Hong Kong SAR China (TGY), Taiwan (BRI). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G9287ZHU2BPE1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G9287 is available: G9287ZHS4CRH1.

Download firmware
8.7/10 (457)8,860 times
Android 6.0.1 (Marshmallow)
OS Version
2016-06-21
Build Date
2
Countries
2
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S6 edge+ use bootloader binary 4 (latest: G9287ZHS4CRH1). If your device already runs binary 4, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: G9287ZHS2BPF3
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G9287
    BRI Taiwan
    		G9287ZZT2BPF3 2016-06-30 2.062 GiB
    SM-G9287_1_20170315152852_wclyhtw78g_fac.zip
    SM-G9287
    TGY Hong Kong SAR China
    		G9287ZZH2BPF3 2016-06-30 2.061 GiB
    SM-G9287_1_20170315153413_2kyr4pypy3_fac.zip

    No matching downloads

    How to flash G9287ZHS2BPF3

    • G9287ZHS2BPF3 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in G9287ZHS2BPF3

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    Rollout of G9287ZHS2BPF3 by region

    Samsung released this build in all regions (2) on the same day, June 30, 2016.

    Device specifications

    • Launched withAndroid 5.1
    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • Battery capacity3000 mAh
    • Weight153 g

    Specifications of SM-G928, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    G9287ZHS2BPF3 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy S6 edge+, released for Hong Kong SAR China (TGY), Taiwan (BRI). Samsung built it on 2016-06-21.

    No. A newer build for SM-G9287 is available: G9287ZHS4CRH1. Install it instead of G9287ZHS2BPF3 unless you need this exact version. The previous build was G9287ZHU2BPE1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 edge+ must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy S6 edge+ running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 17 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6 edge+

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - My Samsung app will be removed from the preload app after the service is terminated.
    - Added new feature
    ㆍThe Samsung Members app will be added.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - Improved performance
    ㆍThe Stability of Samsung Pay Function has been improved.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - OS upgrade - Android 7.0 Nougat
    - Provides new UX and various performance modes
    - Improved usability of the Notification feature and Quick settings button
    - Improved usability of the Multi window and setting menu
    - Efficient space for installation of downloaded apps, improved speed of system upgrade and app installation
    - Clock usability has been improved. Dual clock widget will be reset to default
    - Gallery wigdet will be reset to default

    Show 9 older builds

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - The mySamsung app is added.
    ㆍIt helps you easily set up, manage and optimize Samsung device.
    ㆍGet customer service right at your fingertips.
    - "Samsung GALAXY Life" server out of service."Samsung GALAXY Life" app will no longer be available.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - Other bug fixes
    ㆍFixed the issue that overdischarge when using device in China.
    ㆍFixed the issue that network data icon disappeared at the first time boot after factory data reset.
    ㆍFixed the issue that could not connect with WLAN at some special cases.
    ㆍFixed an issue that Launcher could not be selected
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - Other bug fixes
    ㆍFixed an occasional failure error of forwarding specific media.
    ㆍAn error has been resolved when some users add the date of event to contacts
    ㆍFixed issue that is terminated in the specific route when using Memo
    ㆍThe date display issue on Clock widget has been resolved.
    ㆍFixed issue that download booster function does not work
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - OS upgrade : Android 6.0 Marshmallow
    - The new TouchWiz provides a brandㆍnew visual design and enhanced usability
    - Quick connect makes device connection more convenient
    - Fingerprints combined with pattern, PIN and password provide enhanced security for lock screen function
    - Advanced power saving mode restricts background data and extends battery life
    - Apply the new vibration mode
    ※ Before Urgrade, please update Gear manager to latest version.
    ※ Android 6.0 Marshmallow does not support...

    Model firmware by region