Samsung Galaxy S6 edge+ G928FXXS2BPE4
SM-G928F 14 countries Android 6.0.1 (Nougat)

Samsung Galaxy S6 edge+ G928FXXS2BPE4 Firmware

Samsung Galaxy S6 edge+ G928FXXS2BPE4 is an Android 6.0.1 (Nougat) firmware for 14 countries, 25 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G928FXXS2BPE2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G928F is available: G928FXXU5CVG3.

8.9/10 (451)108,827 times
Android 6.0.1 (Nougat)
OS Version
2016-05-04
Build Date
n/a
Security patch
14
Countries
25
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S6 edge+ use bootloader binary 5 (latest: G928FXXU5CVG3). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    25
    MODEM/CP Version: G928FXXS2BPE4
    ModelRegionCSC VersionSizeFile nameDownload
    SM-G928F
    AMO Spain
    		G928F2BPC2 — —
    SM-G928F
    COA Romania
    		G928F2BPC3 — —
    SM-G928F
    COS Greece
    		G928F2BPC3 — —
    SM-G928F
    CRO Croatia
    		G928FDHX2BPC3 — —
    SM-G928F
    DDE Germany
    		G928FDDX2BPC3 — —
    SM-G928F
    DHR Croatia
    		G928FDHX2BPC3 — —
    SM-G928F
    DNL Netherlands
    		G928FDNX2BPC3 — —
    SM-G928F
    DPL Poland
    		G928FDPX2BPC3 — —
    SM-G928F
    DTM Germany
    		G928FDDX2BPC3 — —
    SM-G928F
    FTM France
    		G928F2BPC2 — —
    SM-G928F
    IDE Poland
    		G928F2BPC2 — —
    SM-G928F
    MAX Austria
    		G928FDAX2BPC3 — —
    SM-G928F
    MBM Macedonia
    		G928F2BPC3 — —
    SM-G928F
    O2U United Kingdom
    		G928FTEF2BPC1 — —
    SM-G928F
    ORO Romania
    		G928F2BPC2 — —
    SM-G928F
    TMH Hungary
    		G928F2BPC3 — —
    SM-G928F
    TMS Slovakia
    		G928F2BPC3 — —
    SM-G928F
    TMZ Czechia
    		G928F2BPC3 — —
    SM-G928F
    TNL Netherlands
    		G928FDNX2BPC3 — —
    SM-G928F
    TPL Poland
    		G928FDPX2BPC3 — —
    SM-G928F
    TRG Austria
    		G928FDAX2BPC3 — —
    SM-G928F
    TTR Austria
    		G928FDAX2BPC3 — —
    SM-G928F
    VIA Germany
    		G928FTEF2BPC1 — —
    SM-G928F
    XEC Spain
    		G928FTEF2BPC1 — —
    SM-G928F
    XEF France
    		G928FOXX2BPC5 — —

    No matching downloads

    Device specifications

    • Launched withAndroid 5.1
    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.1 GHz
    • Processor familySamsung Exynos
    • Processor model7 Octa 7420
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3000 mAh
    • Weight153 g

    How to flash G928FXXS2BPE4

    • G928FXXS2BPE4 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    G928FXXS2BPE4 is Android 6.0.1 (Nougat) firmware for Samsung Galaxy S6 edge+, released for 14 countries, 25 CSC codes. Samsung built it on 2016-05-04.

    No. A newer build for SM-G928F is available: G928FXXU5CVG3. Install it instead of G928FXXS2BPE4 unless you need this exact version. The previous build was G928FXXS2BPE2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 edge+ must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy S6 edge+ running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 30 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6 edge+

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    No changelog details available.
    Show 15 older builds
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    Model firmware by region