SM-G928F 13 countries Android 7.0 (Lollipop)

Samsung Galaxy S6 edge+ G928FXXS4CRA2 Firmware

Name: Samsung Galaxy S6 edge+ (SM-G928F)
Brand: Samsung
Availability: InStock

Samsung Galaxy S6 edge+ G928FXXS4CRA2 is an Android 7.0 (Lollipop) firmware for 13 countries, 14 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G928FXXS4CRA1: Android updated from Android 7.0 (Nougat) to Android 7.0 (Lollipop). A newer build for SM-G928F is available: G928FXXU5CVG3.

8.8/10 (452)60,367 times

Android 7.0 (Lollipop)

OS Version

2018-01-04

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S6 edge+ use bootloader binary 5 (latest: G928FXXU5CVG3). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: G928FXXS4CRA2

Model	Region	CSC Version	Size	File name
SM-G928F	ATO Austria	G928F3CQJ1	—	—
SM-G928F	BGL Bulgaria	G928FOXX3CQI1	—	—
SM-G928F	CAC Uzbekistan	G928FOXE3CQJ1	—	—
SM-G928F	CAU Kazakhstan	G928FOXE3CQJ1	—	—
SM-G928F	CYO Cyprus	G928FOXX3CQI1	—	—
SM-G928F	ROM Romania	G928FOXX3CQI1	—	—
SM-G928F	SEB Baltic Europe	G928FOXX3CQI1	—	—
SM-G928F	SEE Serbia	G928FOXX3CQI1	—	—
SM-G928F	SEK Ukraine	G928FOXE3CQJ1	—	—
SM-G928F	SER Russia	G928FOXE3CQJ1	—	—
SM-G928F	SIO Slovenia	G928FOXX3CQI1	—	—
SM-G928F	SKZ Kazakhstan	G928FOXE3CQJ1	—	—
SM-G928F	XEF France	G928FOXX3CQI1	—	—
SM-G928F	XEO Poland	G928FOXX3CQI1	—	—

Device specifications

Launched withAndroid 5.1
Display diagonal14.5 cm (5.7")
Display resolution2560 x 1440 pixels
Display typeSAMOLED
Processor frequency2.1 GHz
Processor familySamsung Exynos
Processor model7 Octa 7420
RAM4 GB
Rear camera resolution16 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity3000 mAh
Weight153 g

How to flash G928FXXS4CRA2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G928FXXS4CRA2 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G928FXXS4CRA2 is Android 7.0 (Lollipop) firmware for Samsung Galaxy S6 edge+, released for 13 countries, 14 CSC codes. Samsung built it on 2018-01-04.

No. A newer build for SM-G928F is available: G928FXXU5CVG3. Install it instead of G928FXXS4CRA2 unless you need this exact version. The previous build was G928FXXS4CRA1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 edge+ must be on bootloader binary 4 or lower.

This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy S6 edge+ running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 17 other builds of this model use the same binary, so you can switch between them in both directions.

Other builds and changelog for Samsung Galaxy S6 edge+

G928FXXU5CVG3 Aug 26, 2022

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

G928FXXU5CVG2 Sep 7, 2022

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

G928FXXU5CVG1 Aug 19, 2022

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

G928FXXU5CRI1 Sep 17, 2018