Samsung Galaxy S7 G930FXXS4ESAE Firmware
Samsung Galaxy S7 G930FXXS4ESAE is an Android 8.0.0 (Oreo) firmware for 19 countries, 24 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G930FXXS4ESA5 https://samfirm.shop/build/G930FXXS4ESA5, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G930F is available: G930FXXU8EZCD https://samfirm.shop/build/G930FXXU8EZCD.
Android 8.0.0 (Oreo)
OS Version
2019-01-29
First release
other regions until 2019-02-07
19
Countries
24
CSC codes
4
Bootloader binary
Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
Newer builds of Samsung Galaxy S7 use bootloader binary 8 (latest: G930FXXU8EZCD https://samfirm.shop/build/G930FXXU8EZCD). If your device already runs binary 8, this build cannot be flashed.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
28
| Model | Region | CSC Version | MODEM/CP Version | Build Date | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|---|
| SM-G930F |
ATO Austria | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
AUT Switzerland | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
BGL Bulgaria | G930FOXX4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
BTU United Kingdom | G930FOXA4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
ETL Czechia | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
EUR Greece | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
EVR United Kingdom | G930FEVR4ERKF | G930FXXU4ESAE | 2019-02-07 | 2019-02-21 | 2.204 GiB | SM-G930F_1_20220814165530_squrw6x364_fac.zip | Download |
| SM-G930F |
EVR United Kingdom | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
ITV Italy | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
LUX Luxembourg | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
OPS Australia | G930FOPS4ESAE | G930FXXU4ESAE | 2019-01-31 | 2019-03-06 | 2.297 GiB | SM-G930F_1_20220802111350_11tva3llhy_fac.zip | Download |
| SM-G930F |
OPS Australia | G930F4ESAE | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
ORX Slovakia | G930FORX4ERKF | G930FXXU4ESAE | 2019-02-07 | 2019-02-18 | 2.221 GiB | SM-G930F_1_20220808111330_b23ierf95m_fac.zip | Download |
| SM-G930F |
ORX Slovakia | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
PHE Spain | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
PHN Netherlands | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
ROM Romania | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
SEB Baltic Europe | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
SEE Serbia | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
SIO Slovenia | G930FOXX4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
TEL Australia | G930F4ESAE | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
TPH Portugal | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
VAU Australia | G930FVAU4ESAE | G930FXXU4ESAE | 2019-01-31 | 2019-03-07 | 2.284 GiB | SM-G930F_1_20220802140800_f403lnq2e7_fac.zip | Download |
| SM-G930F |
VAU Australia | G930F4ESAE | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
XEH Hungary | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
XEO Poland | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
XEU United Kingdom | G930F4ERKF | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
| SM-G930F |
XSA Australia | G930F4ESAE | G930FXXS4ESAE | 2019-01-29 | — | — | — | Download |
No matching downloads
How to flash G930FXXS4ESAE
- G930FXXS4ESAE has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Rollout of G930FXXS4ESAE by region
- First release
- February 18, 2019
- Last region
- March 7, 2019
- Duration
- 18 days
- Regions
- 4
- Day 1 · · 1 regionSlovakiaORX
- Day 4 · · 1 regionUnited KingdomEVR
- Day 17 · · 1 regionAustraliaOPS
- Day 18 · · 1 regionAustraliaVAU
Device specifications
- Launched withAndroid 6.0
- Display diagonal12.9 cm (5.1")
- Display resolution2560 x 1440 pixels
- Display typeSAMOLED
- Processor frequency2.3 GHz
- Processor familySamsung Exynos
- RAM4 GB
- RAM typeLPDDR4
- Rear camera resolution12 MP
- Rear camera typeSingle camera
- SIM cardsSingle SIM
- Battery capacity3000 mAh
- Weight152 g
Frequently Asked Questions
G930FXXS4ESAE is Android 8.0.0 (Oreo) firmware for Samsung Galaxy S7, released for 19 countries, 24 CSC codes. Samsung built it on 2019-01-29.
No. A newer build for SM-G930F is available: G930FXXU8EZCD. Install it instead of G930FXXS4ESAE unless you need this exact version. The previous build was G930FXXS4ESA5.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S7 must be on bootloader binary 4 or lower.
This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy S7 running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 23 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy S7
No changelog details available.
- G930FXXU8EZCDApr 20, 2026
- G930FXXU8EZCCApr 20, 2026
- G930FXXU8EZCAApr 20, 2026
- G930FXXU8EZC9Apr 20, 2026
- G930FXXU8EZC8Apr 20, 2026
- G930FXXU8EVH2Aug 20, 2022
- G930FXXU8EVH1Sep 14, 2022
- G930FXXU8EVG5Aug 26, 2022
- G930FXXU8EVG4Aug 19, 2022
• GPS
The stability has been improved.
No changelog details available.
- G930FXXU8EVG2Aug 19, 2022
- G930FXXU8EUE1Jun 15, 2021
- G930FXXS8ETKKDec 4, 2020
- G930FXXS8ETKJJan 15, 2021
- G930FXXS8ETKIDec 2, 2020
- G930FXXS8ETKHDec 2, 2020
- G930FXXS8ETKGDec 3, 2020
· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.
No changelog details available.
- G930FXXS8ETKEFeb 11, 2021
- G930FXXS8ETKDDec 3, 2020