Samsung Galaxy S7 G930UUEU9CSA3
SM-G930U 1 country Android 8.0.0 (Oreo)

Samsung Galaxy S7 G930UUEU9CSA3 Firmware

Samsung Galaxy S7 G930UUEU9CSA3 is an Android 8.0.0 (Oreo) firmware for United States (ACG, AIO, ATT, BST, LRA, SPR, TFN, TMB, TMK, USC, VMU, VZW, XAA, XAS). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G930UUES8CSA1: bootloader binary raised from 8 to 9, so after installing it there is no way back to older builds. A newer build for SM-G930U is available: G930UUESBCTA3.

Download firmware
8.7/10 (479)60,703 times
Android 8.0.0 (Oreo)
OS Version
2019-01-28
First release
other regions until 2019-02-11
1
Countries
14
CSC codes
9
Bootloader binary

Bootloader binary 9. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S7 use bootloader binary B (11) (latest: G930UUESBCTA3). If your device already runs binary B (11), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    2
    MODEM/CP Version: G930UUEU9CSA3
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-G930U
    ACG, BST, LRA, SPR, TFN, USC, VMU, VZW, XAS United States
    		G930UOYM9CSA3 2019-02-11 2019-02-27 2.877 GiB
    SM-G930U_2_20200211183403_8tlrgaz2n8_fac.zip
    MD5:47725949e805b6de69666158cf1fed22
    SHA1:4ff2942b985b4816e2886643bfbb0a7f98cc970f
    		Download
    SM-G930U
    AIO, ATT, TMB, TMK, XAA United States
    		G930UOYM9CSA3 2019-01-28 2019-02-27 2.877 GiB
    SM-G930U_2_20220401193920_15lbtlwzc2_fac.zip
    		Download

    No matching downloads

    How to flash G930UUEU9CSA3

    • G930UUEU9CSA3 has bootloader binary 9. Your device must run binary 9 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G930UUEU9CSA3 by region

    First release
    February 27, 2019
    Last region
    March 5, 2019
    Duration
    7 days
    Regions
    14
    1. Day 1 · · 13 regions
      United StatesACGAIOATTBSTSPRTFNTMBTMKUSCVMUVZWXAAXAS
    2. Day 7 · · 1 region
      United StatesLRA

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal12.9 cm (5.1")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • RAM4 GB
    • RAM typeLPDDR4
    • Rear camera resolution12 MP
    • Rear camera typeSingle camera
    • Battery capacity3000 mAh
    • Weight152 g

    Specifications of SM-G930F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    G930UUEU9CSA3 is Android 8.0.0 (Oreo) firmware for Samsung Galaxy S7, released for United States (ACG, AIO, ATT, BST, LRA, SPR, TFN, TMB, TMK, USC, VMU, VZW, XAA, XAS). Samsung built it on 2019-01-28.

    No. A newer build for SM-G930U is available: G930UUESBCTA3. Install it instead of G930UUEU9CSA3 unless you need this exact version. The previous build was G930UUES8CSA1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S7 must be on bootloader binary 9 or lower.

    This build uses bootloader binary 9. It can be flashed on a Samsung Galaxy S7 running binary 9 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S7

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region