Samsung Galaxy S7 edge G9350ZCU2BQE2
SM-G9350 1 country Android 7.0 (Nougat)

Samsung Galaxy S7 edge G9350ZCU2BQE2 Firmware

Samsung Galaxy S7 edge G9350ZCU2BQE2 is an Android 7.0 (Nougat) firmware for China (CHC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G9350ZCU2BQD6, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G9350 is available: G9350ZCS5CTA1.

Download firmware
8.7/10 (463)4,210 times
Android 7.0 (Nougat)
OS Version
2017-05-18
Build Date
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S7 edge use bootloader binary 5 (latest: G9350ZCS5CTA1). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: G9350ZCU2BQE2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G9350
    CHC China
    		G93502BQE2 2017-05-29 — — Download

    No matching downloads

    How to flash G9350ZCU2BQE2

    • G9350ZCU2BQE2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in G9350ZCU2BQE2

    - Other bug fixes
    ㆍWhen receiving a call, the problem that the part under the message indicating the position of the phone is not displayed is solved.
    ㆍProblems that are only repeatedly loading when searching applications from the app store are solved.
    ㆍSolved the camera operation error problem.
    ㆍThe stability of the floating message is improved.
    ㆍThe place error problem of the Toast pop up is solved.
    ㆍThe solved the problem of not adding the downloaded Edge Panel.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal14 cm (5.5")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • RAM4 GB
    • RAM typeLPDDR4
    • Rear camera resolution12 MP
    • Rear camera typeSingle camera
    • Battery capacity3600 mAh
    • Weight157 g

    Specifications of SM-G935, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    G9350ZCU2BQE2 is Android 7.0 (Nougat) firmware for Samsung Galaxy S7 edge, released for China (CHC). Samsung built it on 2017-05-18.

    No. A newer build for SM-G9350 is available: G9350ZCS5CTA1. Install it instead of G9350ZCU2BQE2 unless you need this exact version. The previous build was G9350ZCU2BQD6.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S7 edge must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy S7 edge running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 38 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S7 edge

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - Other bug fixes
    ㆍThe stability of S voice has been improved.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - Added new feature
    ㆍChina Telecom VoLTE function has been added.
    - "Samsung video" service will be terminated. "Samsung video" application will no longer be available and will be deleted.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - Other bug fixes
    ㆍFixes the issue that application icon display problem installed in the SD card.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    Show 3 older builds

    - Added new feature
    ㆍSamsung Reader application will be added.
    - Improved performance
    ㆍSohu news APP will be updated.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    - Added new feature
    ㆍGame Launcher is activated.
    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    Samsung Experience 9.0 upgrade with Android Oreo

    Samsung Experience 9.0 brings you Android Oreo, with exciting new features from Samsung and Google based on feedback from users like you.

    We recommend that you back up your important data to keep it safe during the upgrade.
    Some apps, including Samsung Pay, Samsung Internet, Memo, and Email, should be updated individually before you can update your OS.

    - The user settings of easy mode may be removed on new OS, please reset them after OS upgrade...

    Model firmware by region