Samsung Galaxy S7 edge G935FXXS2DRCE
SM-G935F 4 countries Android 7.0 (Oreo)

Samsung Galaxy S7 edge G935FXXS2DRCE Firmware

Samsung Galaxy S7 edge G935FXXS2DRCE is an Android 7.0 (Oreo) firmware for 4 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G935FXXS2DRCC: Android updated from Android 7.0 (Nougat) to Android 7.0 (Oreo). A newer build for SM-G935F is available: G935FXXU8EZCD.

Download firmware
8.7/10 (461)60,806 times
Android 7.0 (Oreo)
OS Version
2018-03-23
Build Date
4
Countries
7
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S7 edge use bootloader binary 8 (latest: G935FXXU8EZCD). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-G935F
    NZC New Zealand
    		G935F2DRACG935FXXS2DRCE — — — Download
    SM-G935F
    NZC New Zealand
    		G935FNZC2DRACG935FXXU2DRAC 2018-04-16 2.353 GiB
    SM-G935F_1_20220802151930_alfg8sdn6v_fac.zip
    		Download
    SM-G935F
    OPS Australia
    		G935F2DRACG935FXXS2DRCE — — — Download
    SM-G935F
    OPS Australia
    		G935FOPS2DRACG935FXXU2DRAC 2018-04-30 2.323 GiB
    SM-G935F_1_20220802121800_q17uq661fu_fac.zip
    		Download
    SM-G935F
    PNG Papua New Guinea
    		G935F2DRACG935FXXS2DRCE — — — Download
    SM-G935F
    PNG Papua New Guinea
    		G935FPNG2DRACG935FXXU2DRAC 2018-04-16 2.346 GiB
    SM-G935F_1_20220802162500_98dsnb5lfd_fac.zip
    		Download
    SM-G935F
    TNZ New Zealand
    		G935F2DRACG935FXXS2DRCE — — — Download
    SM-G935F
    TNZ New Zealand
    		G935FTNZ2DRACG935FXXU2DRAC 2018-04-16 2.436 GiB
    SM-G935F_1_20220802162750_bwim3515l6_fac.zip
    		Download
    SM-G935F
    VFJ Fiji
    		G935F2DRACG935FXXS2DRCE — — — Download
    SM-G935F
    VFJ Fiji
    		G935FVFJ2DRACG935FXXU2DRAC 2018-04-16 2.325 GiB
    SM-G935F_1_20220802165430_hwo5rbacri_fac.zip
    		Download
    SM-G935F
    VNZ New Zealand
    		G935F2DRACG935FXXS2DRCE — — — Download
    SM-G935F
    VNZ New Zealand
    		G935FVNZ2DRACG935FXXU2DRAC 2018-04-16 2.348 GiB
    SM-G935F_1_20220802170021_0vray7a2qb_fac.zip
    		Download
    SM-G935F
    XSA Australia
    		G935F2DRACG935FXXS2DRCE — — — Download
    SM-G935F
    XSA Australia
    		G935FXSA2DRACG935FXXU2DRAC 2018-04-30 2.306 GiB
    SM-G935F_1_20220802144421_rr43wieykq_fac.zip
    		Download

    No matching downloads

    How to flash G935FXXS2DRCE

    • G935FXXS2DRCE has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G935FXXS2DRCE by region

    First release
    April 16, 2018
    Last region
    April 30, 2018
    Duration
    15 days
    Regions
    7
    1. Day 1 · · 5 regions
      FijiVFJNew ZealandNZCTNZVNZPapua New GuineaPNG
    2. Day 15 · · 2 regions
      AustraliaOPSXSA

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal14 cm (5.5")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.3 GHz
    • Processor familySamsung Exynos
    • RAM4 GB
    • RAM typeLPDDR4
    • Rear camera resolution12 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3600 mAh
    • Weight157 g

    Frequently Asked Questions

    G935FXXS2DRCE is Android 7.0 (Oreo) firmware for Samsung Galaxy S7 edge, released for 4 countries, 7 CSC codes. Samsung built it on 2018-03-23.

    No. A newer build for SM-G935F is available: G935FXXU8EZCD. Install it instead of G935FXXS2DRCE unless you need this exact version. The previous build was G935FXXS2DRCC.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S7 edge must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy S7 edge running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 48 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S7 edge

    No changelog details available.

    • GPS
    The stability has been improved.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region