Samsung Galaxy S7 edge G935FXXS4ESA5
SM-G935F 3 countries Android 8.0.0 (Oreo)

Samsung Galaxy S7 edge G935FXXS4ESA5 Firmware

Samsung Galaxy S7 edge G935FXXS4ESA5 is an Android 8.0.0 (Oreo) firmware for Fiji (VFJ), New Zealand (NZC, TNZ, VNZ), Papua New Guinea (PNG). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G935FXXU3ESAC: bootloader binary raised from 3 to 4, so after installing it there is no way back to older builds. A newer build for SM-G935F is available: G935FXXU8EZCD.

Download firmware
9.1/10 (27)35,075 times
Android 8.0.0 (Oreo)
OS Version
2019-01-31
First release
other regions until 2019-02-13
3
Countries
5
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S7 edge use bootloader binary 8 (latest: G935FXXU8EZCD). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-G935F
    NZC New Zealand
    		G935FNZC4ESA5G935FXXU4ESA5 2019-02-13 2019-03-11 2.353 GiB
    SM-G935F_1_20220802151930_alfg8sdn6v_fac.zip
    		Download
    SM-G935F
    NZC New Zealand
    		G935F4ESA5G935FXXS4ESA5 2019-01-31 — — — Download
    SM-G935F
    PNG Papua New Guinea
    		G935FPNG4ESA5G935FXXU4ESA5 2019-02-01 2019-03-11 2.346 GiB
    SM-G935F_1_20220802162500_98dsnb5lfd_fac.zip
    		Download
    SM-G935F
    PNG Papua New Guinea
    		G935F4ESA5G935FXXS4ESA5 2019-01-31 — — — Download
    SM-G935F
    TNZ New Zealand
    		G935FTNZ4ESA5G935FXXU4ESA5 2019-02-13 2019-03-11 2.436 GiB
    SM-G935F_1_20220802162750_bwim3515l6_fac.zip
    		Download
    SM-G935F
    TNZ New Zealand
    		G935F4ESA5G935FXXS4ESA5 2019-01-31 — — — Download
    SM-G935F
    VFJ Fiji
    		G935F4ESA5G935FXXS4ESA5 2019-01-31 — — — Download
    SM-G935F
    VNZ New Zealand
    		G935FVNZ4ESA5G935FXXU4ESA5 2019-02-13 2019-03-11 2.332 GiB
    SM-G935F_1_20190213150414_z6c3fm33fr_fac.zip
    		Download
    SM-G935F
    VNZ New Zealand
    		G935F4ESA5G935FXXS4ESA5 2019-01-31 — — — Download

    No matching downloads

    How to flash G935FXXS4ESA5

    • G935FXXS4ESA5 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G935FXXS4ESA5 by region

    Samsung released this build in all regions (4) on the same day, March 11, 2019.

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal14 cm (5.5")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.3 GHz
    • Processor familySamsung Exynos
    • RAM4 GB
    • RAM typeLPDDR4
    • Rear camera resolution12 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3600 mAh
    • Weight157 g

    Frequently Asked Questions

    G935FXXS4ESA5 is Android 8.0.0 (Oreo) firmware for Samsung Galaxy S7 edge, released for Fiji (VFJ), New Zealand (NZC, TNZ, VNZ), Papua New Guinea (PNG). Samsung built it on 2019-01-31.

    No. A newer build for SM-G935F is available: G935FXXU8EZCD. Install it instead of G935FXXS4ESA5 unless you need this exact version. The previous build was G935FXXU3ESAC.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S7 edge must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy S7 edge running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 24 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S7 edge

    No changelog details available.

    • GPS
    The stability has been improved.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region