EK-GC100 6 countries Android 4.1.2 (Jelly Bean)

Samsung Galaxy Camera GC100XXBLL7 Firmware

Name: Samsung Galaxy Camera (EK-GC100)
Brand: Samsung
Availability: InStock

Samsung Galaxy Camera GC100XXBLL7 is an Android 4.1.2 (Jelly Bean) firmware for 6 countries, 6 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build GC100ZSBMC1: Android updated from Jelly(Android Bean) to Android 4.1.2 (Jelly Bean); bootloader binary raised from S (28) to X (33), so after installing it there is no way back to older builds. A newer build for EK-GC100 is available: GC100XXBME1.

8.8/10 (471)26,507 times

Android 4.1.2 (Jelly Bean)

OS Version

2013-01-03

First release

other regions until 2013-01-25

n/a

Security patch

Countries

CSC codes

X (33)

Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: GC100XXBLL7

Model	Region	CSC Version	Build Date	Release date	Size	File name
EK-GC100	DTM Germany	GC100DTMBLL1	2013-01-03	2013-01-22	808.532 MiB	EK-GC100_DTM_1_20130603174649_2rw8f3w9ys_fac.zip
EK-GC100	MAX Austria	GC100MAXBLL1	2013-01-04	2013-01-28	—	—
EK-GC100	SFR France	GC100VFGBLL1	2013-01-03	2013-02-01	—	—
EK-GC100	SIM Slovenia	GC100VFGBLL1	2013-01-03	2013-02-01	—	—
EK-GC100	TCL Portugal	GC100VFGBLL1	2013-01-03	2013-03-22	—	—
EK-GC100	XEC Spain	GC100XECBLL1	2013-01-25	2013-06-13	—	—

How to flash GC100XXBLL7

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

GC100XXBLL7 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

GC100XXBLL7 is Android 4.1.2 (Jelly Bean) firmware for Samsung Galaxy Camera, released for 6 countries, 6 CSC codes. Samsung built it on 2013-01-03.

No. A newer build for EK-GC100 is available: GC100XXBME1. Install it instead of GC100XXBLL7 unless you need this exact version. The previous build was GC100ZSBMC1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 808.532 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Camera must be on bootloader binary X (33) or lower.

This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy Camera running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 4 other builds of this model use the same binary, so you can switch between them in both directions.