Samsung Galaxy S 4 (Exynos Octa) I9500UBUHPB2
GT-I9500 4 countries Android 5.0.1 (Lollipop)

Samsung Galaxy S 4 (Exynos Octa) I9500UBUHPB2 Firmware

Samsung Galaxy S 4 (Exynos Octa) I9500UBUHPB2 is an Android 5.0.1 (Lollipop) firmware for 4 countries, 6 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build I9500UBUHOL1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for GT-I9500 is available: I9500ZCUJQD1.

Download firmware
9.4/10 (460)30,391 times
Android 5.0.1 (Lollipop)
OS Version
2016-02-18
First release
other regions until 2016-04-18
4
Countries
6
CSC codes
U (30)
Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: I9500UBUHPB2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    GT-I9500
    ARO Argentina
    		I9500UUBHPB2 2016-02-18 2016-03-14 1.432 GiB
    GT-I9500_1_20170118090413_cnl4zwnnps_fac.zip
    		Download
    GT-I9500
    CGU Guatemala
    		I9500UWMHPB2 2016-02-18 2016-03-14 1.512 GiB
    GT-I9500_1_20170201093613_bzzx5otxne_fac.zip
    		Download
    GT-I9500
    EBE Ecuador
    		I9500TFGHPB2 — — — — Download
    GT-I9500
    PSN Argentina
    		I9500HPB2 2016-02-18 — — — Download
    GT-I9500
    PSN Argentina
    		I9500PSNHPB2 2016-02-18 2016-04-05 1.46 GiB
    GT-I9500_1_20170201095152_kwsemzs3o8_fac.zip
    		Download
    GT-I9500
    UFN Argentina
    		I9500TFGHPB2 2016-02-18 2016-04-12 1.453 GiB
    GT-I9500_1_20170208091300_oxayir3tq7_fac.zip
    		Download
    GT-I9500
    UFU Uruguay
    		I9500TFGHPB2 2016-04-18 2016-04-18 1.451 GiB
    GT-I9500_1_20160412101214_5tri3qktss_fac.zip
    		Download

    No matching downloads

    How to flash I9500UBUHPB2

    • I9500UBUHPB2 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of I9500UBUHPB2 by region

    First release
    March 14, 2016
    Last region
    April 18, 2016
    Duration
    36 days
    Regions
    5
    1. Day 1 · · 2 regions
      ArgentinaAROGuatemalaCGU
    2. Day 23 · · 1 region
      ArgentinaPSN
    3. Day 30 · · 1 region
      ArgentinaUFN
    4. Day 36 · · 1 region
      UruguayUFU

    Device specifications

    • Launched withAndroid 4.2.2
    • Display diagonal12.7 cm (5")
    • Display resolution1920 x 1080 pixels
    • Display typeSAMOLED
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2600 mAh
    • Weight130 g

    Frequently Asked Questions

    I9500UBUHPB2 is Android 5.0.1 (Lollipop) firmware for Samsung Galaxy S 4 (Exynos Octa), released for 4 countries, 6 CSC codes. Samsung built it on 2016-02-18.

    No. A newer build for GT-I9500 is available: I9500ZCUJQD1. Install it instead of I9500UBUHPB2 unless you need this exact version. The previous build was I9500UBUHOL1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S 4 (Exynos Octa) must be on bootloader binary U (30) or lower.

    This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy S 4 (Exynos Octa) running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 109 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S 4 (Exynos Octa)

    No changelog details available.
    Model firmware by region