Samsung Galaxy J1 J100FNXXU0APC1
SM-J100FN 12 countries Android 4.4.4 (KitKat)

Samsung Galaxy J1 J100FNXXU0APC1 Firmware

Samsung Galaxy J1 J100FNXXU0APC1 is an Android 4.4.4 (KitKat) firmware for 12 countries, 16 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J100FNXXU0APB2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-J100FN.

Download firmware
9.3/10 (484)70,215 times
Android 4.4.4 (KitKat)
OS Version
2016-04-01
First release
other regions until 2016-05-19
12
Countries
16
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    15
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-J100FN
    AFR Kenya
    		J100FNOJV0APB2J100FNXXU0APC1 — — — — Download
    SM-J100FN
    CEL, PTR Israel
    		J100FNOJK0APC1J100FNXXU0APC1 2016-05-19 2016-04-25 628.112 MiB
    SM-J100FN_1_20160425102340_6hzbw8c1vn_fac.zip
    		Download
    SM-J100FN
    ILO Israel
    		J100FNOJK0APC1J100FNXXU0APC1 — — — — Download
    SM-J100FN
    KSA Saudi Arabia
    		J100FNOJV0APB2J100FNXXU0APC1 — — — — Download
    SM-J100FN
    MAT Morocco
    		J100FNOJV0APB2J100FNXXU0APC1 — — — — Download
    SM-J100FN
    MDO Moldova
    		J100FNOXE0APC1J100FNXXU0APA2 — — — — Download
    SM-J100FN
    MID Iraq
    		J100FNOJV0APB2J100FNXXU0APC1 — — — — Download
    SM-J100FN
    MRU Mauritius
    		J100FNOJV0APB2J100FNXXU0APC1 — — — — Download
    SM-J100FN
    MTZ Zambia
    		J100FNOJV0APB2J100FNXXU0APC1 — — — — Download
    SM-J100FN
    MWD Morocco
    		J100FNOJV0APB2J100FNXXU0APC1 — — — — Download
    SM-J100FN
    OMD Ukraine
    		J100FNOXE0APC1J100FNXXU0APA2 — — — — Download
    SM-J100FN
    PCL Israel
    		J100FNOJK0APC1J100FNXXU0APC1 — — — — Download
    SM-J100FN
    SER Russia
    		J100FNOXE0APC1J100FNXXU0APA2 2016-04-01 2016-04-01 549.693 MiB
    SM-J100FN_1_20160401102027_tkqf45t18w_fac.zip
    		Download
    SM-J100FN
    TUR Turkey
    		J100FNOJV0APB2J100FNXXU0APC1 — — — — Download
    SM-J100FN
    XFU Angola
    		J100FNOJV0APB2J100FNXXU0APC1 — — — — Download

    No matching downloads

    How to flash J100FNXXU0APC1

    • J100FNXXU0APC1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J100FNXXU0APC1 by region

    First release
    April 1, 2016
    Last region
    May 19, 2016
    Duration
    49 days
    Regions
    3
    1. Day 1 · · 1 region
      RussiaSER
    2. Day 25 · · 1 region
      IsraelCEL
    3. Day 49 · · 1 region
      IsraelPTR

    Device specifications

    • Display diagonal10.9 cm (4.3")
    • Display resolution480 x 800 pixels
    • Display typeTFT
    • RAM0.5 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity1850 mAh
    • Weight122 g

    Specifications of SM-J100H, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J100FNXXU0APC1 is Android 4.4.4 (KitKat) firmware for Samsung Galaxy J1, released for 12 countries, 16 CSC codes. Samsung built it on 2016-04-01.

    Yes. J100FNXXU0APC1 is the newest build for SM-J100FN on SamFirm. The previous build was J100FNXXU0APB2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J1 must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy J1 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 11 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J1

    No changelog details available.
    Model firmware by region