Samsung Galaxy J1 J100MUUBU0AOL1 Firmware
Samsung Galaxy J1 J100MUUBU0AOL1 is an Android 4.4.4 (KitKat) firmware for 5 countries, 7 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J100MUUBU0AOK1 https://samfirm.shop/build/J100MUUBU0AOK1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J100MU is available: J100MUUBU0AQC1 https://samfirm.shop/build/J100MUUBU0AQC1.
Android 4.4.4 (KitKat)
OS Version
2015-12-18
First release
other regions until 2016-02-25
5
Countries
7
CSC codes
0
Bootloader binary
Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
| Model | Region | CSC Version | MODEM/CP Version | Build Date | Release date | Size | File name | Download |
|---|---|---|---|---|---|---|---|---|
| SM-J100MU |
ARO Argentina
TTT Trinidad & Tobago
UPO Uruguay | J100MUUUB0AOK2 | J100MUUBU0AOL1 | 2015-12-18 | 2015-12-30 | 540.568 MiB | SM-J100MU_1_20170307104852_mft2cd94k2_fac.zip | Download |
| SM-J100MU |
PSN Argentina | J100MUPSN0AOL1 | J100MUUBU0APB2 | 2016-02-25 | 2016-02-25 | 543.686 MiB | SM-J100MU_1_20160225162727_vdmgsf1e0k_fac.zip | Download |
| SM-J100MU |
PSN Argentina | J100MU0AOL1 | J100MUUBU0AOL1 | 2015-12-18 | — | — | — | Download |
| SM-J100MU |
PSN Argentina | J100MUPSN0AOL1 | J100MUUBU0AOL1 | 2015-12-18 | 2016-02-11 | 544.059 MiB | SM-J100MU_1_20160616160114_87d9w3virn_fac.zip | Download |
| SM-J100MU |
PSP Argentina | J100MUPSP0AOI2 | J100MUUBU0AOL1 | 2016-02-15 | 2016-02-15 | 523.696 MiB | SM-J100MU_1_20160215105040_ridoh4umwq_fac.zip | Download |
| SM-J100MU |
PSP Argentina | J100MU0AOI2 | J100MUUBU0AOL1 | 2015-12-18 | — | — | — | Download |
| SM-J100MU |
PVT Peru | J100MU0AOI2 | J100MUUBU0AOL1 | 2015-12-18 | — | — | — | Download |
| SM-J100MU |
TGP Paraguay | J100MUUWM0AOI2 | J100MUUBU0AOL1 | 2015-12-18 | 2016-01-19 | 612.619 MiB | SM-J100MU_1_20170427151300_8f0130x8dq_fac.zip | Download |
No matching downloads
How to flash J100MUUBU0AOL1
- J100MUUBU0AOL1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Rollout of J100MUUBU0AOL1 by region
- First release
- December 30, 2015
- Last region
- February 15, 2016
- Duration
- 48 days
- Regions
- 6
- Day 1 · · 1 regionTrinidad & TobagoTTT
- Day 21 · · 2 regionsArgentinaAROParaguayTGP
- Day 44 · · 2 regionsArgentinaPSNUruguayUPO
- Day 48 · · 1 regionArgentinaPSP
Device specifications
- Launched withAndroid 4.4.4
- Display diagonal10.9 cm (4.3")
- Display resolution800 x 480 pixels
- Display typeTFT
- Processor frequency1.2 GHz
- Processor familyMarvell
- Processor modelPXA1908
- RAM0.768 GB
- Rear camera resolution5 MP
- Rear camera typeSingle camera
- SIM cardsSingle SIM
- Battery capacity1850 mAh
- Weight122 g
Frequently Asked Questions
J100MUUBU0AOL1 is Android 4.4.4 (KitKat) firmware for Samsung Galaxy J1, released for 5 countries, 7 CSC codes. Samsung built it on 2015-12-18.
No. A newer build for SM-J100MU is available: J100MUUBU0AQC1. Install it instead of J100MUUBU0AOL1 unless you need this exact version. The previous build was J100MUUBU0AOK1.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J1 must be on bootloader binary 0 or lower.
This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy J1 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 18 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy J1
No changelog details available.
- J100MUUBU0AQC1Mar 15, 2017
- J100MUUBU0AQB2Feb 14, 2017
- J100MUUBU0APF1Jun 1, 2016
- J100MUUBU0APE1May 5, 2016
- J100MUUBU0APD1Apr 7, 2016
- J100MUUBU0APB2Feb 15, 2016
- J100MUUBU0AOL1Dec 18, 2015
- J100MUUBU0AOK1Nov 5, 2015
- J100MUUBU0AOI2Sep 14, 2015
- J100MUUBU0AOG1Jul 28, 2015
- J100MUUBU0AOE4May 20, 2015
- J100MUUBU0AOE3May 13, 2015
- J100MUUBU0AOE2May 12, 2015
- J100MUUBU0AOE1May 4, 2015
- J100MUUBU0AOD2Apr 28, 2015
- J100MUUBU0AOD1Apr 1, 2015
- J100MUUBU0AOC1Mar 13, 2015
- J100MUUBU0AOB6Feb 24, 2015
- J100MUUBU0AOB5Feb 17, 2015